Frequently Asked Questions About Kenworth T2000 Windshield, Wiper & Roof Accessories

What years does the Kenworth T2000 windshield fit, and are there different sizes?

The Kenworth T2000 was produced from 1996 to 2010, and all model years use the same windshield dimensions. The standard windshield measures approximately 72" wide by 24" tall. However, you'll need to verify whether your truck has the standard flat windshield or the optional curved aerodynamic version, as these require different part numbers. Most aftermarket windshields are designed for the flat version unless specifically noted.

How difficult is it to replace the wiper motor and linkage assembly on a T2000?

Replacing the wiper motor and linkage typically takes 2-3 hours for someone with basic mechanical skills. The most challenging part is accessing the motor, which sits behind the dashboard. You'll need to remove the lower dash panel and possibly the glove box for clearance. Common issues include seized linkage bushings and corroded electrical connections. We recommend replacing the entire assembly rather than individual components, as the labor involved is similar and ensures all wear parts are new.

Will aftermarket sun visors block my mirror mounts and CB antenna?

Most aftermarket sun visors for the T2000 are designed with cutouts for standard mirror mounts, but clearance can be tight with certain West Coast-style mirrors. The visor typically extends 5-6 inches from the windshield, which may interfere with CB antennas mounted on the mirror arms. Many drivers relocate their antenna to the roof or use a shorter whip antenna. Always check the visor dimensions against your specific mirror setup before ordering.

What's the difference between OEM and aftermarket windshield quality?

OEM Kenworth windshields use PPG or Pilkington glass with a green tint band and DOT/AS1 certification. Quality aftermarket options from brands like Safeguard or FYG match OEM specifications but cost 40-60% less. The main differences are minor: aftermarket glass may have a slightly different tint shade or lack the Kenworth logo. Both options use the same thickness (typically 6mm) and safety standards. Avoid unbranded imports that may have distortion issues or poor UV coating.

Do I need special tools or adhesive to install a windshield seal?

Installing a T2000 windshield seal requires a seal installation tool (rope or cable type), glass cleaner, and butyl rubber sealant. The OEM-style one-piece seal doesn't require adhesive if installed correctly, but many installers add a bead of butyl tape for extra weatherproofing. The job typically takes 3-4 hours with a helper. Critical areas to seal are the bottom corners where water commonly leaks. Professional installation runs $200-400 but ensures proper fit and warranty coverage.