Frequently Asked Questions About International S2200-S2600 Hood Emblems & Bezels

Will these emblems and bezels fit my specific International S2200-S2600 model year?

Most aftermarket emblems and bezels are designed to fit International S2200-S2600 trucks from model years 2002-2017. However, there can be slight variations between early and late production models. We recommend checking your existing emblem mounting hole spacing before ordering. The standard mounting pattern for most S-Series trucks uses 3-bolt or 4-bolt configurations with specific center-to-center measurements. If you're unsure, contact us with your VIN or current emblem measurements for verification.

What's the difference between chrome plastic and die-cast metal emblems?

Chrome plastic emblems are lightweight, cost-effective, and resist corrosion well, but may fade or yellow after 3-5 years of sun exposure. Die-cast metal emblems with triple chrome plating offer superior durability and maintain their shine longer, typically lasting 7-10 years with proper care. Metal emblems are heavier and more expensive but provide a premium look and feel. For trucks in harsh climates or commercial use, we typically recommend the die-cast options.

Do I need to remove my grille to install new hood emblems and bezels?

In most cases, you can install hood emblems without removing the grille by accessing the mounting points from under the hood. However, some bezel installations may require partial grille removal for proper alignment. You'll typically need basic hand tools including socket wrenches (usually 10mm and 13mm), and possibly trim removal tools for older emblems. Installation usually takes 30-45 minutes. Always disconnect the battery if your emblems have LED backlighting.

Are lighted LED emblems compatible with my truck's electrical system?

LED emblems designed for S2200-S2600 trucks typically operate on 12V systems and draw minimal current (usually under 2 amps). Most connect directly to your parking light circuit or can be wired to a separate switch. Pre-2008 models may require an additional ground wire for proper operation. LED emblems include weather-sealed connections and are DOT compliant. Make sure to use the included resistors if specified to prevent hyperflashing or electrical issues.

How do I prevent my new emblems from being stolen?

Emblem theft is a common concern for International truck owners. We recommend using anti-theft mounting hardware that includes security screws requiring special removal tools. Some bezels feature locking tabs that make removal difficult without access from behind. For high-value emblems, consider adding a small amount of permanent thread locker to the mounting bolts. Additionally, etching your VIN or identifier on the back of the emblem can deter theft and aid in recovery.