Frequently Asked Questions About Ford LTA / LTL 9000 Truck Mud Flaps
Will these mud flaps fit my specific year Ford LTA or LTL 9000?
Our Ford LTA/LTL 9000 mud flaps are designed to fit models from 1976 through 1997. However, there are slight variations between early models (1976-1987) and later models (1988-1997) in mounting hole patterns. Most universal-fit mud flaps in this category will work for all years, but custom-fit options may specify exact year ranges. Always check the product description for specific year compatibility, or contact our support team with your truck's VIN for verification.
What's the difference between rubber and poly mud flaps, and which should I choose?
Rubber mud flaps are heavier, more flexible, and typically last 3-5 years under normal conditions. They're ideal for standard highway driving and provide excellent spray control. Poly (polymer) mud flaps are lighter, more rigid, and can last 5-8 years. They resist cracking in extreme cold better than rubber and won't curl at highway speeds. For dump trucks or heavy-duty applications, we recommend 3/8" thick rubber. For long-haul highway driving, poly flaps offer better longevity and fuel efficiency due to their lighter weight.
Do I need special brackets or can I mount these directly to my existing hangers?
Most Ford LTA/LTL 9000 trucks have existing mud flap hangers that accept standard 2.5" or 3" bolt patterns. Our universal mud flaps come pre-drilled with multiple mounting holes to accommodate both patterns. If your hangers are damaged or missing, you'll need to purchase mounting brackets separately. Anti-sail brackets are recommended for trucks that frequently run empty or at highway speeds to prevent the flaps from riding up.
What size mud flaps do I need for my Ford LTA/LTL 9000?
Standard sizes for these trucks are 24" x 30" for the rear and 24" x 24" for the front (if equipped). However, if you've modified your suspension, added larger tires, or lowered your truck, you may need different sizes. Measure from your mounting point to approximately 6-8 inches from the ground for proper coverage. Remember that DOT regulations in most states require mud flaps to be within 10 inches of the ground when the vehicle is loaded.
How difficult is the installation, and what tools will I need?
Installation typically takes 30-45 minutes per axle and requires basic hand tools: a drill with 3/8" and 1/2" bits, socket wrench set, and mounting hardware (usually included). The most common challenge is accessing the upper mounting bolts on the rear hangers - a ratcheting wrench helps in tight spaces. If you're replacing existing mud flaps, it's straightforward. For new installations, you may need to drill 2-4 holes per flap. Some customers report that having a second person hold the flap in position while marking holes makes the job much easier.
