Frequently Asked Questions About Ford Aeromax Truck Driving Lights

What years and models of Ford Aeromax trucks are these driving lights compatible with?

Our Ford Aeromax driving lights are designed to fit 1988-1997 Ford Aeromax L9000, LT9000, LA9000, LTA9000, and LTS9000 models. The mounting brackets and wiring harnesses are specifically engineered for the Aeromax's bumper configuration during these production years. If you have a 1998 or newer Ford truck, you'll need to check our Sterling or newer Ford model sections as the bumper designs changed significantly.

How difficult is the installation process, and what tools will I need?

Installation typically takes 2-3 hours for someone with basic mechanical skills. You'll need a drill with metal bits (5/16" and 3/8" recommended), a socket set, wire strippers, electrical tape or heat shrink tubing, and basic hand tools. Most lights mount using existing bumper holes or require drilling 2-4 new holes. The wiring connects to your existing headlight circuit or requires a separate switch installation. Detailed instructions are included with each light kit, and many customers report successful DIY installations.

Are these lights DOT approved, and what's the difference between driving and fog light options?

Yes, all our Aeromax driving lights carry DOT approval stamps for on-road use. Driving lights project a focused beam pattern designed to extend your forward visibility at highway speeds - they should be wired to turn off with high beams. Fog lights have a wider, lower beam pattern that cuts under fog and mist. For Aeromax trucks, driving lights typically mount on the bumper wings, while fog lights mount lower on the bumper center section.

What housing materials are available, and how do they hold up to road salt and weather?

We offer three main housing options: chrome-plated steel, polished stainless steel, and black powder-coated steel. Stainless steel provides the best corrosion resistance and typically lasts 10+ years even in salt-heavy regions. Chrome-plated housings look great but may show pitting after 3-5 years in harsh conditions. Black powder-coated options resist rust well but may fade over time. All options include sealed beam construction to prevent moisture intrusion.

Can I use LED bulbs in these lights, and what wattage is recommended?

Most Aeromax driving light housings accept standard H3 or 9005/9006 bulbs, which are available in LED versions. We recommend 55-100 watt halogen or 35-50 watt LED equivalents to avoid overheating the housing and melting the lens. LED conversions typically require no wiring modifications and provide brighter output with less power draw. However, some older sealed beam units cannot be converted to LED and must be replaced entirely with LED-specific units.