Upgrade Your T600 Front End Visibility With LED Projector Headlights & Mount Hardware
If your Kenworth T600 is still running strong, don't let old, dull headlights hold you back. Whether you're running overnight hauls or just want to upgrade your rig's style, our lineup of aftermarket headlights has what you need to light up the road, and turn a few heads while you're at it.
Choose from classic crystal lens styles, modern LED projector beams, or bold chrome housings with integrated turn signals and halo rings. These headlights deliver better visibility, longer life, and a sharp new look, all in one easy-to-install package.
Why Upgrade Your T600 Headlights?
- Improved Night Visibility: Brighter beams help you see farther and react faster, especially in low-light or bad weather.
- Modern Style: Give your T600 a fresh, aggressive look with chrome bezels, halo accents, or blackout finishes.
- Built to Last: Weather-resistant, corrosion-proof materials stand up to long miles and rough roads.
- Easy Install: Most are plug-and-play, no complicated wiring or custom brackets required.
Find Headlight Bezels, Housings & More
- LED projector headlights with crisp beam focus
- Classic crystal lens replacements
- Chrome and black housing options
- Integrated turn signals and position lights
- Halo ring accents for a custom edge
- Driver side, passenger side, and complete kits available
Whether you're swapping out damaged lights or
T600 front-bumper parts, or you're going for a style improvement, these headlights and headlight accessories deliver. Reliable, stylish, and ready for the road. Pair your purchase with Kenworth T600 driving lights and
T600 LED clearance lights for more nighttime visibility.
don't drive another mile with weak headlights. Upgrade today and see the road, and your rig, in a whole new light.
Frequently Asked Questions About Kenworth T600 LED Headlights
Will these LED headlights fit my specific year Kenworth T600?
Our LED headlights are designed to fit Kenworth T600 models from 1994 to 2007. They use the standard 7-inch round sealed beam pattern with H6024 or H6054 housing compatibility. If your T600 has rectangular headlights (some early 1990s models), you'll need rectangular LED conversions instead. Always verify your current headlight size before ordering - measure across the face of your existing headlight to confirm the 7-inch diameter.
Do I need any special wiring or adapters to install LED headlights in my T600?
Most of our LED headlights are plug-and-play with the standard H4 three-prong connector found in T600s. However, some trucks may require an anti-flicker harness or load resistor to prevent hyperflashing or dashboard warning lights. If your T600 has daytime running lights (DRL), you may need a DRL decoder. The installation typically takes 30-45 minutes per side with basic hand tools - no cutting or splicing required for standard applications.
What's the real difference in brightness between LED and my stock halogen headlights?
LED headlights typically produce 3,000-4,000 lumens per bulb compared to 1,000-1,400 lumens from standard halogen sealed beams. This translates to approximately 200-300% more usable light on the road. The light pattern is also whiter (5,000-6,000K color temperature) versus the yellowish halogen output, providing better contrast and visibility in rain, fog, and night driving conditions. Most drivers report seeing road signs and markers 100-200 feet sooner with LEDs.
How long do these LED headlights actually last, and what about warranty coverage?
Quality LED headlights are rated for 30,000-50,000 hours of operation, compared to 500-1,000 hours for halogen bulbs. In practical terms, this means 10-15 years of typical commercial driving. Most manufacturers offer 2-3 year warranties, with some premium brands extending to 5 years. Common failure points include moisture intrusion and heat sink degradation, so look for units with IP67 waterproof ratings and aluminum heat sinks rather than plastic.
Will LED headlights work in extreme cold weather conditions?
Unlike halogen bulbs that generate significant heat, LEDs run cooler and may not melt snow and ice buildup on the lens surface during winter driving. This is especially important for T600 drivers in northern climates. Some LED models include heated lens technology, but most don't. Many drivers keep their original halogens for severe winter conditions or carry de-icing spray. LEDs themselves function excellently in cold weather - actually performing better in low temperatures - but ice accumulation on the lens can be a consideration.
