Frequently Asked Questions About International PayStar 5000 Clamps, Brackets & Mounts

Will these mounting brackets fit my specific year PayStar 5000?

Most of our mounting brackets and clamps are designed to fit International PayStar 5000 models from 2007-2017. However, there can be variations between model years, especially in cab configurations and frame rail spacing. We recommend checking your truck's specific measurements or contacting our support team with your VIN for exact fitment verification. Pay special attention to whether you have a set-back or set-forward axle configuration, as this affects mounting positions.

What grade of steel are these brackets made from, and will they rust?

Our heavy-duty mounting brackets are typically manufactured from either 3/16" or 1/4" thick steel plate, depending on the application. Most brackets come with a black powder coat finish for corrosion resistance, though some are offered in raw steel for custom finishing. For maximum durability in harsh conditions, we recommend applying additional rust prevention treatment to any exposed metal surfaces after installation, especially if you operate in areas with road salt.

Do I need to drill new holes in my frame to install these mounts?

Many of our brackets are designed to use existing frame holes whenever possible, but some applications do require drilling. Each product description specifies whether drilling is necessary. If drilling is required, we recommend using a magnetic drill press for precision and following proper frame drilling guidelines to avoid weakening the frame structure. Never drill through both sides of a frame rail, and always maintain proper edge distances.

Can these brackets support the weight of aftermarket bumpers and accessories?

Our heavy-duty brackets are engineered to support substantial weight loads typical of commercial bumpers and accessories. Standard brackets can typically handle 300-500 lbs of static weight, while reinforced models can support up to 1,000 lbs. However, actual capacity depends on proper installation and weight distribution. Always factor in dynamic loads from road vibration and impacts when selecting brackets for heavy accessories like winches or crane attachments.

What tools and hardware do I need for installation?

Most installations require basic hand tools including socket wrenches (typically 3/4" and 7/8" sizes), torque wrench, and potentially a drill with metal bits if new holes are needed. Hardware is sometimes included but varies by product - check the product description for specifics. We recommend using Grade 8 bolts minimum for all frame mounting applications. Installation typically takes 2-4 hours depending on complexity and whether you need to remove existing components first.