Shop Freightliner Fuel Tanks

Our large selection of cylindrical and rectangular aftermarket Freightliner Fuel Tanks come in 19 inch, 23 inch and 25 inch diameters, up to 86 inch length and 150 gallon capacity. Choose between steel and aluminum tank steps and top off your new tank with a protective cover in a variety of colors. Aftermarket Freightliner senders, pickup and return tubes, fittings and splitters are also available.

Freightliner Fuel Tanks

Your rig can’t run without fuel—and your fuel tank system needs to be strong, secure, and built for serious miles. That’s where our lineup of aftermarket Freightliner fuel tanks and accessories comes in. Whether you're driving a Cascadia, Columbia, Coronado, or Century, we’ve got the parts to keep your tank setup solid.

Reliable Fuel Storage for Your Freightliner Truck

Choose from 55 to 150-gallon tanks in aluminum or steel with round or rectangular shapes. We offer front-fill and rear-fill configurations to match your layout and install clean with zero guesswork. Every tank in this category is built for heavy-duty commercial use, engineered to resist corrosion and perform under pressure—mile after mile.

Don’t Forget the Essentials

Fuel tanks are just the start. We’ve also got a full lineup of Freightliner fuel tank components and accessories, including: - Fuel tank straps for secure mounting - Pickup lines and sending unit block-off plates - Tank liner kits to help prevent corrosion and extend tank life - Step fairings for easier access and clean styling - Anti-siphon upgrades for added security
All parts are designed for a direct fit on Freightliner semi trucks, so you can install with confidence and get back on the road faster.

Why Upgrade Your Freightliner’s Fuel Tank System?

Replacing a damaged tank or upgrading a worn-out part helps: - Prevent leaks and fuel loss - Improve fuel system efficiency and safety - Reduce downtime and boost range - Keep your Freightliner looking sharp and running smooth
It's also the best time to start replacing components on your Freightliner suspension frame - since this is where your tank sits. Your Freightliner exhaust parts are adjacent to your tank, so consider upgrading these in one fell swoop. Lastly, your tank sends fuel to the engine. So any damaged or worn-out fuel tank coolant lines should get replaced while you're at it. With that said, whether you’re doing a total tank swap or just replacing a pickup line, this category is your one-stop shop.

Frequently Asked Questions About Freightliner Fuel Tanks

What sizes and capacities are available for Freightliner fuel tanks, and how do I know which one fits my truck?

Freightliner fuel tanks typically range from 60 to 150 gallons, with 100-gallon and 120-gallon being the most common sizes. To determine the right fit, check your truck's VIN plate or existing tank dimensions. Measure from the front mounting bracket to the rear bracket center-to-center, and verify the strap spacing matches your frame rails. Most Cascadia models from 2008-2024 use 26-inch diameter tanks, while older Classic and Columbia models may use 23-inch or 25-inch diameters.

Are these fuel tanks made of aluminum or steel, and which material is better for my application?

We offer both aluminum and steel fuel tanks. Aluminum tanks are lighter (saving 40-60 pounds per tank), resist corrosion better, and are ideal for weight-conscious operations or coastal areas with salt exposure. Steel tanks cost less upfront, handle impact damage better, and can be repaired more easily by most shops. For long-haul operations, aluminum typically provides better ROI through weight savings and longevity. Regional or vocational trucks often benefit from steel's durability and lower replacement cost.

Do I need special brackets or hardware to install a replacement fuel tank on my Freightliner?

Most replacement tanks use your existing mounting straps and brackets if they're in good condition. However, you'll need new rubber isolators (recommended every tank change), fuel sending unit gasket, and potentially new fuel line fittings. For 2018+ Cascadia models, verify if you need the updated DEF tank bracket that accommodates the repositioned fuel tank. Installation typically takes 2-4 hours and requires basic hand tools plus a transmission jack or tank jack for safe handling.

Will aftermarket fuel tanks affect my fuel gauge accuracy or DEF system operation?

Quality aftermarket tanks are designed to work with OEM sending units and maintain accurate fuel readings. Ensure the tank you select has the correct sending unit hole pattern - most Freightliners use SAE 5-hole pattern. For 2011+ trucks with DEF systems, the fuel tank mounting position is critical to avoid interference. Some aftermarket tanks include pre-calibrated sending units, while others require transferring your original unit. Always perform a gauge sweep test after installation to verify accuracy.

What's the difference between round and D-shaped fuel tanks, and can I switch styles?

Round tanks offer maximum capacity for the space and are easier to clean internally. D-shaped (or rectangular) tanks sit closer to the frame rail, providing better ground clearance and aerodynamics. You can switch styles, but D-shaped tanks require specific mounting brackets and may need step box modifications. Round tanks are typically 10-15% less expensive and more readily available. Consider your routes - round tanks work well for highway driving, while D-shaped tanks excel in construction sites or off-road conditions where clearance matters.