Description
Fitment
* Fits Kenworth W900A 1970 thru 1982
Aftermarket Punched Grille Insert With 1/4 Inch Circles Small Holes For W900A Kenworth
* High Quality Flat Grille Insert* Custom Aftermarket Punched Grille Insert
* Made Of 18 Gauge 430 Stainless Steel
* Polished On 1 Side
* Cut Out Style - Small Holes ? 1/4 Inch Circles
* Size:
- 44.063 Inches Height
- 42.000 Inches Width
* Made in The USA
* Surround Not Included, Sold Separately
* Sold Individually
* Warranty On Grille Inserts Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Custom Aftermarket Replacement Part ( This Is Not An OEM Part )
Aftermarket Punched Grille Insert With 7/16 Inch Circles - Small Holes For W900A Kenworth
This circle punched insert will look great on your truck. It is constructed with a quality rust resistant stainless steel with an impressive but functional design that allows air to freely flow in and out of the grille consistently. The insert fits securely into a factory style grille surround of a 1970 through 1982 Kenworth W900A.
* High Quality Flat Grille Insert* Custom Aftermarket Punched Grille Insert
* Made Of 18 Gauge 430 Stainless Steel
* Polished On 1 Side
* Cut Out Style - Small Holes ? 7/16 Inch Circles
* Size:
- 44.063 Inches Height
- 42.000 Inches Width
* Made in The USA
* Surround Not Included, Sold Separately
* Sold Individually
* Warranty On Grille Inserts Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Custom Aftermarket Replacement Part ( This Is Not An OEM Part )
Aftermarket Punched Grille Insert With Hexagon Holes For W900A Kenworth
This hexagon punched insert will look great on your truck. It is constructed with a quality rust resistant stainless steel with an impressive but functional design that allows air to freely flow in and out of the grille consistently. The insert fits securely into a factory style grille surround of a 1970 through 1982 Kenworth W900A.
* High Quality Flat Grille Insert* Custom Aftermarket Punched Grille Insert
* Made Of 18 Gauge 430 Stainless Steel
* Polished On 1 Side
* Cut Out Style - Hexagon Holes
* Size:
- 44.063 Inches Height
- 42.000 Inches Width
* Made in The USA
* Surround Not Included, Sold Separately
* Sold Individually
* Warranty On Grille Inserts Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Custom Aftermarket Replacement Part ( This Is Not An OEM Part )
Aftermarket Punched Grille Insert With Horizontal Rectangles For W900A Kenworth
This horizontal rectangle punched insert will look great on your truck. It is constructed with a quality rust resistant stainless steel with an impressive but functional design that allows air to freely flow in and out of the grille consistently. The insert fits securely into a factory style grille surround of a 1970 through 1982 Kenworth W900A.
* High Quality Flat Grille Insert* Custom Aftermarket Punched Grille Insert
* Made Of 18 Gauge 430 Stainless Steel
* Polished On 1 Side
* Cut Out Style - Horizontal Rectangles
* Size:
- 44.063 Inches Height
- 42.000 Inches Width
* Made in The USA
* Surround Not Included, Sold Separately
* Sold Individually
* Warranty On Grille Inserts Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Custom Aftermarket Replacement Part ( This Is Not An OEM Part )
Aftermarket Punched Grille Insert With Vertical Rectangles For W900A Kenworth
This vertical rectangle punched insert will look great on your truck. It is constructed with a quality rust resistant stainless steel with an impressive but functional design that allows air to freely flow in and out of the grille consistently. This insert fits securely into a factory style grille surround of a 1970 through 1982 Kenworth W900A.
* High Quality Flat Grille Insert* Custom Aftermarket Punched Grille Insert
* Made Of 18 Gauge 430 Stainless Steel
* Polished On 1 Side
* Cut Out Style - Vertical Rectangles
* Size:
- 44.063 Inches Height
- 42.000 Inches Width
* Made in The USA
* Surround Not Included, Sold Separately
* Sold Individually
* Warranty On Grille Inserts Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Custom Aftermarket Replacement Part ( This Is Not An OEM Part )
Aftermarket Punched Grille Insert With 5/16 Inch Inline Squares For W900A Kenworth
This inline square punched insert will look great on your truck. It is constructed with a quality rust resistant stainless steel with an impressive but functional design that allows air to freely flow in and out of the grille consistently. This insert fits securely into a factory style grille surround of a 1970 through 1982 Kenworth W900A.
* High Quality Flat Grille Insert* Custom Aftermarket Punched Grille Insert
* Made Of 18 Gauge 430 Stainless Steel
* Polished On 1 Side
* Cut Out Style - 5/16 Inch Inline Squares
* Size:
- 44.063 Inches Height
- 42.000 Inches Width
* Made in The USA
* Surround Not Included, Sold Separately
* Sold Individually
* Warranty On Grille Inserts Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Custom Aftermarket Replacement Part ( This Is Not An OEM Part )
Aftermarket Punched Grille Insert With 5/16 Inch Off Set Squares For W900A Kenworth
This offset square punched insert will look great on your truck. It is constructed with a quality rust resistant stainless steel with an impressive but functional design that allows air to freely flow in and out of the grille consistently. This insert fits securely into a factory style grille surround of a 1970 through 1982 Kenworth W900A.
* High Quality Flat Grille Insert* Custom Aftermarket Punched Grille Insert
* Made Of 18 Gauge 430 Stainless Steel
* Polished On 1 Side
* Cut Out Style - 5/16 Inch Off Set Squares
* Size:
- 44.063 Inches Height
- 42.000 Inches Width
* Made in The USA
* Surround Not Included, Sold Separately
* Sold Individually
* Warranty On Grille Inserts Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Custom Aftermarket Replacement Part ( This Is Not An OEM Part )
Aftermarket Punched Grille Insert With Horizontal Oval Holes For W900A Kenworth
This horizontal oval punched insert will look great on your truck. It is constructed with a quality rust resistant stainless steel with an impressive but functional design that allows air to freely flow in and out of the grille consistently. This insert fits securely into a factory style grille surround of a 1970 through 1982 Kenworth W900A.
* High Quality Flat Grille Insert* Custom Aftermarket Punched Grille Insert
* Made Of 18 Gauge 430 Stainless Steel
* Polished On 1 Side
* Cut Out Style - Horizontal Oval Holes
* Size:
- 44.063 Inches Height
- 42.000 Inches Width
* Made in The USA
* Surround Not Included, Sold Separately
* Sold Individually
* Warranty On Grille Inserts Against Defects In Workmanship & Material From Date Of Purchase
**Kenworth Is A Registered Trademark Owned By PACCAR Inc. Use Of PACCAR?s Logo Is For Demonstrative Purpose Only And Does Not Indicate Endorsement By PACCAR Inc, Its Subsidiaries Or Divisions**
*** High Quality Custom Aftermarket Replacement Part ( This Is Not An OEM Part )
Aftermarket Punched Grille Insert With Vertical Oval Holes For W900A Kenworth
This vertical oval punched insert will look great on your truck. It is constructed with a quality rust resistant stainless steel with an impressive but functional design that allows air to freely flow in and out of the grille consistently. This insert fits securely into a factory style grille surround of a 1970 through 1982 Kenworth W900A.
* High Quality Flat Grille Insert* Custom Aftermarket Punched Grille Insert
* Made Of 18 Gauge 430 Stainless Steel
* Polished On 1 Side
* Cut Out Style - Vertical Oval Holes
* Size:
- 44.063 Inches Height
- 42.000 Inches Width
* Made in The USA
* Surround Not Included, Sold Separately
* Sold Individually
* Warranty On Grille Inserts Against Defects In Workmanship & Material From Date Of Purchase
**Kenworth Is A Registered Trademark Owned By PACCAR Inc. Use Of PACCAR?s Logo Is For Demonstrative Purpose Only And Does Not Indicate Endorsement By PACCAR Inc, Its Subsidiaries Or Divisions**
*** High Quality Custom Aftermarket Replacement Part ( This Is Not An OEM Part )
Aftermarket Punched Grille Insert With 3/16 Inch Horizontal Oblong Holes For W900A Kenworth
This small horizontal oblong punched insert will look great on your truck. It is constructed with a quality rust resistant stainless steel with an impressive but functional design that allows air to freely flow in and out of the grille consistently. The insert fits securely into a factory style grille surround of a 1970 through 1982 Kenworth W900A.
* High Quality Flat Grille Insert* Custom Aftermarket Punched Grille Insert
* Made Of 18 Gauge 430 Stainless Steel
* Polished On 1 Side
* Cut Out Style - 3/16 Inch Horizontal Oblong Holes
* Size:
- 44.063 Inches Height
- 42.000 Inches Width
* Made in The USA
* Surround Not Included, Sold Separately
* Sold Individually
* Warranty On Grille Inserts Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Custom Aftermarket Replacement Part ( This Is Not An OEM Part )
Aftermarket Punched Grille Insert With 3/16 Inch Vertical Oblong Holes For W900A Kenworth
This small vertical oblong punched insert will look great on your truck. It is constructed with a quality rust resistant stainless steel with an impressive but functional design that allows air to freely flow in and out of the grille consistently. The insert fits securely into a factory style grille surround of a 1970 through 1982 Kenworth W900A.
* High Quality Flat Grille Insert* Custom Aftermarket Punched Grille Insert
* Made Of 18 Gauge 430 Stainless Steel
* Polished On 1 Side
* Cut Out Style - 3/16 Inch Vertical Oblong Holes
* Size:
- 44.063 Inches Height
- 42.000 Inches Width
* Made in The USA
* Surround Not Included, Sold Separately
* Sold Individually
* Warranty On Grille Inserts Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Custom Aftermarket Replacement Part ( This Is Not An OEM Part )
Aftermarket Punched Grille Insert With 5/16 Inch Horizontal Oblong Holes For W900A Kenworth
This horizontal oblong punched insert will look great on your truck. It is constructed with a quality rust resistant stainless steel with an impressive but functional design that allows air to freely flow in and out of the grille consistently. The insert fits securely into a factory style grille surround of a 1970 through 1982 Kenworth W900A.
* High Quality Flat Grille Insert* Custom Aftermarket Punched Grille Insert
* Made Of 18 Gauge 430 Stainless Steel
* Polished On 1 Side
* Cut Out Style - 3/16 Inch Horizontal Oblong Holes
* Size:
- 44.063 Inches Height
- 42.000 Inches Width
* Made in The USA
* Surround Not Included, Sold Separately
* Sold Individually
* Warranty On Grille Inserts Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Custom Aftermarket Replacement Part ( This Is Not An OEM Part )
Aftermarket Punched Grille Insert With 5/16 Inch Vertical Oblong Holes For W900A Kenworth
This vertical oblong punched insert will look great on your truck. It is constructed with a quality rust resistant stainless steel with an impressive but functional design that allows air to freely flow in and out of the grille consistently. The insert fits securely into a factory style grille surround of a 1970 through 1982 Kenworth W900A.
* High Quality Flat Grille Insert* Custom Aftermarket Punched Grille Insert
* Made Of 18 Gauge 430 Stainless Steel
* Polished On 1 Side
* Cut Out Style - 3/16 Inch Vertical Oblong Holes
* Size:
- 44.063 Inches Height
- 42.000 Inches Width
* Made in The USA
* Surround Not Included, Sold Separately
* Sold Individually
* Warranty On Grille Inserts Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Custom Aftermarket Replacement Part ( This Is Not An OEM Part )
Aftermarket Punched Grille Insert With Star Pattern For W900A Kenworth
This star punched insert will look great on your truck. It is constructed with a quality rust resistant stainless steel with an impressive but functional design that allows air to freely flow in and out of the grille consistently. The insert fits securely into a factory style grille surround of a 1970 through 1982 Kenworth W900A.
* High Quality Flat Grille Insert* Custom Aftermarket Punched Grille Insert
* Made Of 18 Gauge 430 Stainless Steel
* Polished On 1 Side
* Cut Out Style - Small Holes ? 1/4 Inch Circles
* Size:
- 44.063 Inches Height
- 42.000 Inches Width
* Made in The USA
* Surround Not Included, Sold Separately
* Sold Individually
* Warranty On Grille Inserts Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Custom Aftermarket Replacement Part ( This Is Not An OEM Part )
Aftermarket Punched Grille Insert With Snake Skin Pattern For W900A Kenworth
This snake pattern punched insert will look great on your truck. It is constructed with a quality rust resistant stainless steel with an impressive but functional design that allows air to freely flow in and out of the grille consistently. The insert fits securely into a factory style grille surround of a 1970 through 1982 Kenworth W900A.
* High Quality Flat Grille Insert* Custom Aftermarket Punched Grille Insert
* Made Of 18 Gauge 430 Stainless Steel
* Polished On 1 Side
* Cut Out Style - Snake Skin Pattern
* Size:
- 44.063 Inches Height
- 42.000 Inches Width
* Made in The USA
* Surround Not Included, Sold Separately
* Sold Individually
* Warranty On Grille Inserts Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Custom Aftermarket Replacement Part ( This Is Not An OEM Part )
Additional Information
Location: |
Made In USA |
Truck Class: |
Heavy Duty |
Style Options: |
Punched |
Material Options: |
Stainless Steel |
Make: |
Kenworth |