Buyer’s Guide to Kenworth Exhaust Stack Kits
Looking to buy a new exhaust kit for your Kenworth truck model? Here's what you should know before you buy.
What Comes in a Typical Kenworth Exhaust Kit?
Most standard Kenworth exhaust stack kits include:
- Two exhaust elbows.
- W900B and W900L models require OEM-style elbows rather than aftermarket versions.
- One pair of one-piece stacks or two center spools and two top stacks.
- Four to six exhaust clamps.
Y-pipes, Y-pipe hangers, and cab brackets. The primary exception is a Pickett-style exhaust kit, which typically includes the Y-pipes.
Understanding Aerocab vs. Non-Aerocab Exhaust Systems
Aerocab Kenworth Models
Aerocab trucks feature a more complex exhaust configuration designed to accommodate the aerodynamic cab design.
- Slider clamps secure the stacks to the cab.
- Multi-bend elbows route underneath the truck frame.
- Two frame-mounted support brackets secure the lower elbow section.
- Driver-side and passenger-side elbows are different part numbers.
- Some exhaust kits include replacement frame-bracket clamps, while others require a separate purchase.
Early vs. Late Aerocab Systems
| Aerocab Type | Production Years |
|---|---|
| Early Aerocab | Before 2002 |
| Late Aerocab | 2003 and newer |
Non-Aerocab Kenworth Models
Non-Aerocab trucks use a simpler mounting design:
- Cab-mounted exhaust brackets
- Rubber-isolated mounting straps between clamps and brackets
- Above-frame exhaust routing
Because the exhaust is attached to the cab, the stacks move with normal cab suspension travel.
The flex pipe is what absorbs the movement between the cab-mounted stacks and the chassis-mounted exhaust components.
Kenworth W900A Exhaust Kits (1967-1982)
The W900A uses a traditional exhaust layout featuring:
- Four-hole upper stack clamps
- Circular lower clamps
- Side-specific elbows
- Separate left- and right-side part numbers
Lincoln Chrome W900A Kits
Available in:
- 6-inch stacks
- 7-inch stacks
Typical kit contents:
- 2 elbows
- 2 stacks
- 2 upper clamps
- 2 lower clamps
For two-piece stack configurations, 55-inch center spools can be added.
BESTfit W900A Kits
BESTfit offers a more economical alternative to Lincoln Chrome while maintaining OEM-style fitment and hardware.
Other Available Options
Eagle Exhaust: Aerocab-specific exhaust kits.
Grand Rock Base Kits typically include:
- OE-style elbows
- Chrome spools
- Band clamps
- Sealant
These kits generally do not include chrome stack tops.
Kenworth W900B Non-Aerocab Exhaust Kits
The W900B retains a similar overall design to the W900A but introduces above-frame exhaust routing.
- Above-frame elbow routing
- 90-degree elbow design
- Uses factory-style Y-pipe connections
- Four-hole upper clamp
- Circular lower clamp
OEM-style replacement components remain available, including factory-style 5-inch elbows and replacement hardware.
Aerocab Exhaust Kits
BESTfit Aerocab Exhaust Kits
Available for:
- 6-inch stacks
- 7-inch stacks
- 8-inch stacks
Standard kit contents:
- 2 elbows
- 2 stacks
- 2 upper clamps
- 2 lower circular clamps
- 2 frame-support bracket clamps
Use 55-inch center spools. The elbow diameter reduces after the lower frame bracket, so standard 5-inch bracket clamps should be replaced with upper-style clamps sized to match the elbow diameter.
Lincoln Chrome Aerocab Exhaust Kits
Lincoln Chrome offers kits for all major Aerocab elbow styles in 6-inch, 7-inch, and 8-inch stack configurations.
Typical kit contents:
- 2 one-piece stacks
- 2 upper clamps
- 2 lower circular clamps
- 2 lower frame-bracket clamps
Two-piece configurations use 55-inch center spools. As with BESTfit systems, the diameter reduction below the frame bracket requires matching upper-style clamps rather than standard 5-inch brackets.
Kenworth W900L Exhaust Kits
The W900L presents unique installation considerations due to its longer wheelbase and accessory configurations.
- Side boxes greater than 40 inches wide may need modification or trimming.
- Most long-drop systems use flex pipe connected to a universal Y-pipe.
- The Y-pipe then connects to both exhaust elbows.
One-Piece vs. Two-Piece Stacks
A one-piece stack is generally recommended because:
- Long-drop exhaust systems place additional weight on the stack assembly.
- Fewer joints create greater structural stability.
- Installation is simpler.
Two-piece stacks can still be used, but proper seam placement must be considered before final mounting.
Building a Custom Pickett-Style Long-Drop Exhaust System
Most Pickett-style long-drop systems require additional support hardware not included with standard kits.
Additional components may include:
- Y-pipe hangers
- Custom support brackets
- Additional mounting hardware
Many installers fabricate custom brackets that connect the factory under-frame support bracket to the exhaust elbow for increased stability.
- 2 Pickett elbows
- 2 one-piece stacks
- 2 upper clamps
- 2 lower circular clamps
- Flex pipe and/or Y-pipe
- Y-pipe hangers
- Additional support hardware
Kenworth Muffler Options
- OEM replacement mufflers
- Muffler-delete pipes
- Muffler-delete Y-pipes
While some owner-operators prefer straight-pipe systems for appearance and sound, muffler requirements may vary based on state and local regulations. Always verify compliance before removing factory emissions or noise-control components.
Exhaust Accessories and Upgrades
Appearance Upgrades
- Rain caps
- Chrome grab handles
- Chrome stack accessories
- Perforated heat shields
Performance & Replacement Components
- Turbo down pipes
- Under-hood exhaust piping
- OE replacement exhaust sections
Noise Control Options
- Quiet spools
- OEM replacement mufflers
- Performance mufflers
Quick Buying Checklist
Before ordering an exhaust kit, confirm:
- Truck model: W900A, W900B, W900L, T800, or another application
- Aerocab or Non-Aerocab configuration
- Early or Late Aerocab design
- Stack diameter: 6", 7", or 8"
- One-piece or two-piece stack preference
- Need for Y-pipes or Y-pipe hangers
- Existing side-box clearance on W900L models
- Required cab and frame mounting hardware
Shop for Kenworth Exhaust Stacks at 4 State Trucks
Explore chrome stack top kits, essential hardware, and aftermarket exhaust system upgrades like manifolds, mufflers, and diesel particulate filter components. Order online, use the mobile app, or stop by the shop in Joplin, Missouri.
Recent Posts
-
How to Install a Peterbilt 379 Bumper Lift Kit Using 5 Steps
Flip kits protect your expensive custom bumper from getting scraped. Simply flip a switch in your ca …6th Nov 2026 -
Semi-Truck Mattress Sizes: Fitment Chart & Buying Guide
Looking for the right sized semi truck mattress? Every long-haul trucker should prioritize spending …29th Oct 2026 -
5 Truck Shows You Don't Want to Miss in 2027
What are the best truck shows in America? Over the years, we've visited them all at one point or an …22nd Oct 2026 -
Haul of Fame: Chad Smith’s Custom 2019 Peterbilt
Some trucks are built to work. Some are built to show. Then there are trucks like Chad Smith’s 2019 …16th Oct 2026 -
Semi Truck DPF Systems: How They Work, Problems, Regeneration & Parts
Let’s break down how to maintain peak emissions performance and avoid excessive repairs on big truck …9th Oct 2026 -
What Year Did Semi Trucks Get DPF Systems?
When Did Semi Trucks Start Using DPF Systems? EPA Rules Explained Diesel particulate filters (DPFs) …9th Oct 2026 -
What Is DEF on a Semi Truck? Fluid, Filters, Problems & Maintenance
What Is a DEF (Diesel Exhaust Fluid) Filter? A DEF (Diesel Exhaust Fluid) filter protects the SCR ( …9th Oct 2026 -
Semi Truck DPF Box Covers & Slipcovers: Fitment Guide
Semi Truck DPF Box Covers: Types, Fitment & Replacement What Is a DPF Box Cover on a Semi Truck? DPF …9th Oct 2026 -
How to Buy a Used Semi Truck: The Ultimate Checklist
Buying a used truck is risky. A cheap deal might be extraordinarily expensive in the long run when y …9th Oct 2026