Description
8 To 5 Inch Stacks With Long Drop Elbows & 5 Inch Galvanized Taper Lock Y-Pipe
Are you looking for an exhaust that has what you need? Stop searching, 4 State Trucks have got you covered. If you have an exhaust that is broken it has the ability to cause engine noise that is not normal, decrease the power and acceleration in your truck, increase the fuel consumption, and it might cause a gas smell if there is a leak. This sleek design is an option that has dependability and a premium performance that your truck needs. You get the cut and the length of your preference, so you get what you want. Check out more exhaust kits to find the best option for you and your truck.
Fitment
* Fits Peterbilt 378 1988 thru 2007
* Fits Peterbilt 379 1987 thru 2007
* Fits Peterbilt 389 Glider 2008 thru 2023
8 Inch Chrome Exhaust Kit With 52 Inch Spool Fits Peterbilt 378 & 379
Introducing TPHD CHROME EXHAUST KITS! These Kits Are Installer-Friendly, Produced With All High Quality Components At An Affordable Price.
* High Quality Exhaust Kits* Made Of Chrome Plated Steel
* 108 Inch Overall Height
* Kit Includes:
- (2) 8 x 54 Inch Flat Top Stacks
- (2) 8 Inch OD x 52 Inch Center Section Spools
- (2) 8 To 5 Inch Long Drop 90 Degree Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
- (1) 5 Inch Taperlock Aluminized Long Drop Elbow
- (2) 5 Inch Band Clamp Flat Stainless Steel
- (4) 8 Inch Angled Exhaust Clamp Brackets, Pipe To Cab
- (2) Angled Cab Brackets
- Cab Bracket Hardware
- (8) Exhaust Grommets
* Made In USA
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
***High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
8 Inch Chrome Exhaust Kit With 55 Inch Spool Fits Peterbilt 378 & 379
Introducing TPHD CHROME EXHAUST KITS! These Kits Are Installer-Friendly, Produced With All High Quality Components At An Affordable Price.
* High Quality Exhaust Kits* Made Of Chrome Plated Steel
* 108 Inch Overall Height
* Kit Includes:
- (2) 8 x 54 Inch Flat Top Stacks
- (2) 8 Inch OD x 55 Inch Center Section Spools
- (2) 8 To 5 Inch Long Drop 90 Degree Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
- (1) 5 Inch Taperlock Aluminized Long Drop Elbow
- (2) 5 Inch Band Clamp Flat Stainless Steel
- (4) 8 Inch Angled Exhaust Clamp Brackets, Pipe To Cab
- (2) Angled Cab Brackets
- Cab Bracket Hardware
- (8) Exhaust Grommets
* Made In USA
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
***High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Peterbilt 8 Inch Flat Top Chrome Exhaust Kit W/ 52 Inch Spool
Deliver top performance and style to your Peterbilt 378 or 379 with the TPHD 8-5 X 108 Inch Chrome Exhaust Kit featuring flat top stacks and long drop 90-degree elbows. The kit comprises two 8 X 54 inch stacks and two 8 X 52 inch center spools, engineered to optimize exhaust gas flow. It comes with all necessary hardware for a secure installation, including angled clamps, cab brackets for Unibilt setups, and exhaust grommets. The polished chrome finish offers superior corrosion resistance and a sleek, professional look that enhances your truck's presence on the road.
* High Quality Exhaust Kits* Made Of Chrome Plated Steel
* 108 Inch Overall Height
* Kit Includes:
- (2) 8 x 54 Inch Flat Top Stacks
- (2) 8 Inch OD x 52 Inch Center Section Spools
- (2) 8 To 5 Inch Long Drop 90 Degree Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
- (4) 8 Inch Angled Exhaust Clamp Brackets, Pipe To Cab
- (2) Angled Cab Brackets
- Cab Bracket Hardware
- (8) Exhaust Grommets
* Made In USA
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
***High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Peterbilt 8 Inch Flat Top Chrome Exhaust Kit W/ 55 Inch Spool
For professional Peterbilt drivers seeking performance and durability, the TPHD 8-5 X 108 Inch Chrome Exhaust Kit delivers both in spades. This high-quality kit includes two 8 X 54 inch flat top stacks and two 8 X 55 inch center spools, designed to enhance exhaust flow with 8-5 long drop 90-degree elbows. The package contains all necessary mounting hardware-angled clamps, cab brackets tailored for Unibilt trucks, and exhaust grommets-to guarantee a secure, vibration-free installation. Finished with polished chrome, this kit offers excellent corrosion protection and a standout finish for your rig.
* High Quality Exhaust Kits* Made Of Chrome Plated Steel
* 108 Inch Overall Height
* Kit Includes:
- (2) 8 x 54 Inch Flat Top Stacks
- (2) 8 Inch OD x 55 Inch Center Section Spools
- (2) 8 To 5 Inch Long Drop 90 Degree Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
- (4) 8 Inch Angled Exhaust Clamp Brackets, Pipe To Cab
- (2) Angled Cab Brackets
- Cab Bracket Hardware
- (8) Exhaust Grommets
* Made In USA
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
***High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
8 Inch Exhaust Kit With 52 Inch Spool Fits Peterbilt 378 & 379
Introducing TPHD CHROME EXHAUST KITS! These Kits Are Installer-Friendly, Produced With All High Quality Components At An Affordable Price.
* High Quality Exhaust Kits* Made Of Chrome Plated Steel
* 108 Inch Overall Height
* Kit Includes:
- (2) 8 x 54 Inch Miter Top Stacks
- (2) 8 Inch OD x 52 Inch Center Section Spools
- (2) 8 To 5 Inch Long Drop 90 Degree Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
- (1) 5 Inch Taperlock Aluminized Long Drop Elbow
- (2) 5 Inch Band Clamp Flat Stainless Steel
- (4) 8 Inch Angled Exhaust Clamp Brackets, Pipe To Cab
- (2) Angled Cab Brackets
- Cab Bracket Hardware
- (8) Exhaust Grommets
* Made In USA
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
***High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
8 Inch Exhaust Kit With 55 Inch Spool Fits Peterbilt 378 & 379
Introducing TPHD CHROME EXHAUST KITS! These Kits Are Installer-Friendly, Produced With All High Quality Components At An Affordable Price.
* High Quality Exhaust Kits* Made Of Chrome Plated Steel
* 108 Inch Overall Height
* Kit Includes:
- (2) 8 x 54 Inch Miter Top Stacks
- (2) 8 Inch OD x 55 Inch Center Section Spools
- (2) 8 To 5 Inch Long Drop 90 Degree Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
- (1) 5 Inch Taperlock Aluminized Long Drop Elbow
- (2) 5 Inch Band Clamp Flat Stainless Steel
- (4) 8 Inch Angled Exhaust Clamp Brackets, Pipe To Cab
- (2) Angled Cab Brackets
- Cab Bracket Hardware
- (8) Exhaust Grommets
* Made In USA
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
***High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Peterbilt 8 Inch Miter Exhaust Kit W/ 52 Inch Spool
Experience enhanced performance and style with the TPHD 8-5 X 108 Inch Chrome Exhaust Kit for Peterbilt 378 and 379. Featuring two 8 X 54 inch miter top stacks and two 8 X 52 inch center spools, this kit ensures superior exhaust flow through long drop 90-degree elbows. Every component, including four angled exhaust clamp brackets, two cab brackets built for Unibilt applications, and eight exhaust grommets, is included for a secure and professional installation. Crafted from polished chrome, it offers excellent rust resistance while providing a refined finish that boosts your truck's visual appeal.
* High Quality Exhaust Kits* Made Of Chrome Plated Steel
* 108 Inch Overall Height
* Kit Includes:
- (2) 8 x 54 Inch Miter Top Stacks
- (2) 8 Inch OD x 52 Inch Center Section Spools
- (2) 8 To 5 Inch Long Drop 90 Degree Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
- (4) 8 Inch Angled Exhaust Clamp Brackets, Pipe To Cab
- (2) Angled Cab Brackets
- Cab Bracket Hardware
- (8) Exhaust Grommets
* Made In USA
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
***High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Peterbilt 8 Inch Miter Exhaust Kit W/ 55 Inch Spool
For truckers who demand the best, the TPHD 8-5 X 108 Inch Chrome Exhaust Kit delivers exceptional performance and durability for Peterbilt 378, 379, and 389 trucks. This exhaust system includes two 8 X 54 inch miter top stacks and two 8 X 55 inch spools that facilitate smooth exhaust flow through long drop 90-degree elbows. The kit comes with four angled exhaust clamp brackets, cab brackets customized for Unibilt applications, and eight grommets to ensure secure mounting and reduced vibration. Its polished chrome construction ensures a corrosion-resistant, mirror-like finish that will stand up to tough road conditions and enhance your truck's presence.
* High Quality Exhaust Kits* Made Of Chrome Plated Steel
* 108 Inch Overall Height
* Kit Includes:
- (2) 8 x 54 Inch Miter Top Stacks
- (2) 8 Inch OD x 55 Inch Center Section Spools
- (2) 8 To 5 Inch Long Drop 90 Degree Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
- (4) 8 Inch Angled Exhaust Clamp Brackets, Pipe To Cab
- (2) Angled Cab Brackets
- Cab Bracket Hardware
- (8) Exhaust Grommets
* Made In USA
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
***High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
8 Inch Exhaust Kit With 52 Inch Spool & Long Drop 90 Degree Elbows
Introducing TPHD CHROME EXHAUST KITS! These Kits Are Installer-Friendly, Produced With All High Quality Components At An Affordable Price.
* High Quality Exhaust Kits* Made Of Chrome Plated Steel
* 108 Inch Overall Height
* Kit Includes:
- (2) 8 x 54 Inch West Coast Top Stacks
- (2) 8 Inch OD x 52 Inch Center Section Spools
- (2) 8 To 5 Inch Long Drop 90 Degree Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
- (1) 5 Inch Taperlock Aluminized Long Drop Elbow
- (2) 5 Inch Band Clamp Flat Stainless Steel
- (4) 8 Inch Angled Exhaust Clamp Brackets, Pipe To Cab
- (2) Angled Cab Brackets
- Cab Bracket Hardware
- (8) Exhaust Grommets
* Made In USA
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
***High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
8 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbows
Introducing TPHD CHROME EXHAUST KITS! These Kits Are Installer-Friendly, Produced With All High Quality Components At An Affordable Price.
* High Quality Exhaust Kits* Made Of Chrome Plated Steel
* 108 Inch Overall Height
* Kit Includes:
- (2) 8 x 54 Inch West Coast Top Stacks
- (2) 8 Inch OD x 55 Inch Center Section Spools
- (2) 8 To 5 Inch Long Drop 90 Degree Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
- (1) 5 Inch Taperlock Aluminized Long Drop Elbow
- (2) 5 Inch Band Clamp Flat Stainless Steel
- (4) 8 Inch Angled Exhaust Clamp Brackets, Pipe To Cab
- (2) Angled Cab Brackets
- Cab Bracket Hardware
- (8) Exhaust Grommets
* Made In USA
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
***High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Peterbilt Chrome 8 Inch Exhaust Kit W/ 52 Inch Spool & Long Drop 90 Degree Elbows
For a high-performance, stylish exhaust upgrade, the TPHD 8-5 X 108 Inch Chrome West Coast Turnout Stack Exhaust Kit offers Peterbilt 378 and 379 trucks unmatched quality and durability. Equipped with two 8 X 54 inch West Coast stacks and two 8 X 52 inch spools, this kit ensures efficient exhaust gas flow and smooth operation. Installation is simplified with included long drop elbows, angled exhaust clamp brackets, Unibilt cab brackets, and exhaust grommets that provide a vibration-resistant fit. The polished chrome finish not only resists corrosion but also adds a premium, professional look to your rig.
* High Quality Exhaust Kits* Made Of Chrome Plated Steel
* 108 Inch Overall Height
* Kit Includes:
- (2) 8 x 54 Inch West Coast Top Stacks
- (2) 8 Inch OD x 52 Inch Center Section Spools
- (2) 8 To 5 Inch Long Drop 90 Degree Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
- (4) 8 Inch Angled Exhaust Clamp Brackets, Pipe To Cab
- (2) Angled Cab Brackets
- Cab Bracket Hardware
- (8) Exhaust Grommets
* Made In USA
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
***High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Peterbilt Chrome 8 Inch Exhaust Kit W/ 55 Inch Spool & Long Drop 90 Degree Elbows
For a professional-grade exhaust upgrade, the TPHD 8-5 X 108 Inch Chrome West Coast Turnout Stack Exhaust Kit delivers superior craftsmanship and reliable performance for Peterbilt 378, 379, and 389 trucks. With two 8 X 54 inch West Coast stacks and matching 8 X 55 inch spools, the system enhances exhaust efficiency and sound. Included long drop elbows and installation hardware such as angled clamp brackets and cab mounts provide a stable, vibration-free fit. The durable chrome finish ensures long-lasting protection while adding a sleek, high-end aesthetic to your rig.
* High Quality Exhaust Kits* Made Of Chrome Plated Steel
* 108 Inch Overall Height
* Kit Includes:
- (2) 8 x 54 Inch West Coast Top Stacks
- (2) 8 Inch OD x 55 Inch Center Section Spools
- (2) 8 To 5 Inch Long Drop 90 Degree Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
- (4) 8 Inch Angled Exhaust Clamp Brackets, Pipe To Cab
- (2) Angled Cab Brackets
- Cab Bracket Hardware
- (8) Exhaust Grommets
* Made In USA
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
***High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
8 Inch Exhaust Kit With 52 Inch Spool Fits Peterbilt 378 & 379
Introducing TPHD CHROME EXHAUST KITS! These Kits Are Installer-Friendly, Produced With All High Quality Components At An Affordable Price.
* High Quality Exhaust Kits* Made Of Chrome Plated Steel
* 114 Inch Overall Height
* Kit Includes:
- (2) 8 x 60 Inch Flat Top Stacks
- (2) 8 Inch OD x 52 Inch Center Section Spools
- (2) 8 To 5 Inch Long Drop 90 Degree Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
- (1) 5 Inch Taperlock Aluminized Long Drop Elbow
- (2) 5 Inch Band Clamp Flat Stainless Steel
- (4) 8 Inch Angled Exhaust Clamp Brackets, Pipe To Cab
- (2) Angled Cab Brackets
- Cab Bracket Hardware
- (8) Exhaust Grommets
* Made In USA
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
***High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
8 Inch Exhaust Kit With 55 Inch Spool Fits Peterbilt 378 & 379
Introducing TPHD CHROME EXHAUST KITS! These Kits Are Installer-Friendly, Produced With All High Quality Components At An Affordable Price.
* High Quality Exhaust Kits* Made Of Chrome Plated Steel
* 114 Inch Overall Height
* Kit Includes:
- (2) 8 x 60 Inch Flat Top Stacks
- (2) 8 Inch OD x 55 Inch Center Section Spools
- (2) 8 To 5 Inch Long Drop 90 Degree Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
- (1) 5 Inch Taperlock Aluminized Long Drop Elbow
- (2) 5 Inch Band Clamp Flat Stainless Steel
- (4) 8 Inch Angled Exhaust Clamp Brackets, Pipe To Cab
- (2) Angled Cab Brackets
- Cab Bracket Hardware
- (8) Exhaust Grommets
* Made In USA
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
***High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Peterbilt 8 Inch Flat Top Chrome Exhaust Kit W/ 52 Inch Spool
Built to provide reliable performance and stunning aesthetics, the TPHD 8-5 X 114 Inch Chrome Flat Top Stack Exhaust Kit is designed specifically for Peterbilt 378 and 379 models. This kit features two 8 X 60 inch flat top stacks and two 8 X 52 inch spools for optimal exhaust gas management. Long drop elbows and a comprehensive mounting hardware package ensure a solid, vibration-resistant installation. The polished chrome finish adds superior corrosion protection and a clean, eye-catching appearance to your truck.
* High Quality Exhaust Kits* Made Of Chrome Plated Steel
* 114 Inch Overall Height
* Kit Includes:
- (2) 8 x 60 Inch Flat Top Stacks
- (2) 8 Inch OD x 52 Inch Center Section Spools
- (2) 8 To 5 Inch Long Drop 90 Degree Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
- (4) 8 Inch Angled Exhaust Clamp Brackets, Pipe To Cab
- (2) Angled Cab Brackets
- Cab Bracket Hardware
- (8) Exhaust Grommets
* Made In USA
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
***High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Peterbilt 8 Inch Flat Top Chrome Exhaust Kit W/ 55 Inch Spool
Give your Peterbilt 378, 379, or 389 a serious upgrade in both performance and style with the TPHD 8-5 X 114 Inch Chrome Flat Top Stack Exhaust Kit. Engineered for heavy-duty use, this kit features two 8 X 60 inch flat top stacks and two 8 X 55 inch center spools for a commanding presence and smoother exhaust flow. The 8 to 5 inch long drop 90-degree elbows are designed to reduce backpressure and improve exhaust efficiency. With angled exhaust clamp brackets, Unibilt cab brackets, and eight grommets included, you'll get a secure, vibration-resistant fit. Built from high-quality chrome-plated components, this TPHD kit delivers long-lasting durability and eye-catching shine for the long haul.
* High Quality Exhaust Kits* Made Of Chrome Plated Steel
* 114 Inch Overall Height
* Kit Includes:
- (2) 8 x 60 Inch Flat Top Stacks
- (2) 8 Inch OD x 55 Inch Center Section Spools
- (2) 8 To 5 Inch Long Drop 90 Degree Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
- (4) 8 Inch Angled Exhaust Clamp Brackets, Pipe To Cab
- (2) Angled Cab Brackets
- Cab Bracket Hardware
- (8) Exhaust Grommets
* Made In USA
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
***High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
8 Inch Exhaust Kit With 52 Inch Spool Fits Peterbilt 378 & 379
Introducing TPHD CHROME EXHAUST KITS! These Kits Are Installer-Friendly, Produced With All High Quality Components At An Affordable Price.
* High Quality Exhaust Kits* Made Of Chrome Plated Steel
* 114 Inch Overall Height
* Kit Includes:
- (2) 8 x 60 Inch Miter Top Stacks
- (2) 8 Inch OD x 52 Inch Center Section Spools
- (2) 8 To 5 Inch Long Drop 90 Degree Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
- (1) 5 Inch Taperlock Aluminized Long Drop Elbow
- (2) 5 Inch Band Clamp Flat Stainless Steel
- (4) 8 Inch Angled Exhaust Clamp Brackets, Pipe To Cab
- (2) Angled Cab Brackets
- Cab Bracket Hardware
- (8) Exhaust Grommets
* Made In USA
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
***High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
8 Inch Exhaust Kit With 55 Inch Spool Fits Peterbilt 378 & 379
Introducing TPHD CHROME EXHAUST KITS! These Kits Are Installer-Friendly, Produced With All High Quality Components At An Affordable Price.
* High Quality Exhaust Kits* Made Of Chrome Plated Steel
* 114 Inch Overall Height
* Kit Includes:
- (2) 8 x 60 Inch Miter Top Stacks
- (2) 8 Inch OD x 55 Inch Center Section Spools
- (2) 8 To 5 Inch Long Drop 90 Degree Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
- (1) 5 Inch Taperlock Aluminized Long Drop Elbow
- (2) 5 Inch Band Clamp Flat Stainless Steel
- (4) 8 Inch Angled Exhaust Clamp Brackets, Pipe To Cab
- (2) Angled Cab Brackets
- Cab Bracket Hardware
- (8) Exhaust Grommets
* Made In USA
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
***High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Peterbilt 8 Inch Miter Exhaust Kit W/ 52 Inch Spool
Outfit your Peterbilt 378 or 379 with a bold, professional-grade look using the TPHD 8-5 X 114 Inch Chrome Miter Stack Exhaust Kit. Built for performance and visual impact, this high-quality kit includes two 8 X 60 inch miter top stacks and two 8 X 52 inch center spools designed to improve exhaust flow while minimizing restriction. The long drop 8 to 5 inch 90-degree elbows provide a clean, aggressive drop that enhances airflow and backpressure reduction. Complete with angled pipe-to-cab clamp brackets, Unibilt cab brackets, and eight exhaust grommets, installation is smooth and secure. Finished in brilliant chrome, this TPHD kit brings long-lasting durability and a polished edge to your truck's overall appearance.
* High Quality Exhaust Kits* Made Of Chrome Plated Steel
* 114 Inch Overall Height
* Kit Includes:
- (2) 8 x 60 Inch Miter Top Stacks
- (2) 8 Inch OD x 52 Inch Center Section Spools
- (2) 8 To 5 Inch Long Drop 90 Degree Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
- (4) 8 Inch Angled Exhaust Clamp Brackets, Pipe To Cab
- (2) Angled Cab Brackets
- Cab Bracket Hardware
- (8) Exhaust Grommets
* Made In USA
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
***High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Peterbilt 8 Inch Miter Exhaust Kit W/ 55 Inch Spool
Enhance the performance and appearance of your Peterbilt 378, 379, or 389 with the TPHD 8-5 X 114 Inch Chrome Miter Stack Exhaust Kit. This high-quality kit includes two 8 X 60 inch miter top stacks and two 8 X 55 inch center section spools, built to deliver powerful exhaust flow and a commanding presence on the road. The 8 to 5 inch long drop 90-degree elbows provide a clean, aggressive look while improving airflow and reducing backpressure. Designed with durability in mind, this kit comes complete with angled pipe-to-cab brackets, Unibilt-compatible cab brackets, and eight exhaust grommets for a secure and vibration-resistant install. With a polished chrome finish that resists corrosion, this TPHD exhaust kit combines rugged reliability with bold style for the long haul.
* High Quality Exhaust Kits* Made Of Chrome Plated Steel
* 114 Inch Overall Height
* Kit Includes:
- (2) 8 x 60 Inch Miter Top Stacks
- (2) 8 Inch OD x 55 Inch Center Section Spools
- (2) 8 To 5 Inch Long Drop 90 Degree Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
- (4) 8 Inch Angled Exhaust Clamp Brackets, Pipe To Cab
- (2) Angled Cab Brackets
- Cab Bracket Hardware
- (8) Exhaust Grommets
* Made In USA
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
***High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
8 Inch Exhaust Kit With 52 Inch Spool & Long Drop 90 Degree Elbows
Introducing TPHD CHROME EXHAUST KITS! These Kits Are Installer-Friendly, Produced With All High Quality Components At An Affordable Price.
* High Quality Exhaust Kits* Made Of Chrome Plated Steel
* 114 Inch Overall Height
* Kit Includes:
- (2) 8 x 60 Inch West Coast Top Stacks
- (2) 8 Inch OD x 52 Inch Center Section Spools
- (2) 8 To 5 Inch Long Drop 90 Degree Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
- (1) 5 Inch Taperlock Aluminized Long Drop Elbow
- (2) 5 Inch Band Clamp Flat Stainless Steel
- (4) 8 Inch Angled Exhaust Clamp Brackets, Pipe To Cab
- (2) Angled Cab Brackets
- Cab Bracket Hardware
- (8) Exhaust Grommets
* Made In USA
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
***High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
8 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbows
Introducing TPHD CHROME EXHAUST KITS! These Kits Are Installer-Friendly, Produced With All High Quality Components At An Affordable Price.
* High Quality Exhaust Kits* Made Of Chrome Plated Steel
* 114 Inch Overall Height
* Kit Includes:
- (2) 8 x 60 Inch West Coast Top Stacks
- (2) 8 Inch OD x 55 Inch Center Section Spools
- (2) 8 To 5 Inch Long Drop 90 Degree Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
- (1) 5 Inch Taperlock Aluminized Long Drop Elbow
- (2) 5 Inch Band Clamp Flat Stainless Steel
- (4) 8 Inch Angled Exhaust Clamp Brackets, Pipe To Cab
- (2) Angled Cab Brackets
- Cab Bracket Hardware
- (8) Exhaust Grommets
* Made In USA
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
***High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Peterbilt Chrome 8 Inch Exhaust Kit W/ 52 Inch Spool & Long Drop 90 Degree Elbows
Take your Peterbilt 378 or 379 to the next level with the TPHD 8-5 X 114 Inch Chrome Exhaust Kit featuring West Coast turnout stacks and long drop 90-degree elbows. This premium kit is built for durability and style, offering a bold West Coast look with two 8 X 60 inch turnout top stacks and two 8 X 52 inch spools for consistent exhaust flow. The included 8 to 5 inch long drop elbows enhance performance while delivering an aggressive profile. Designed for a secure and efficient installation, the kit also includes four angled clamp brackets, two angled cab brackets for Unibilt applications, and eight exhaust grommets. With a gleaming chrome finish and rugged construction, this TPHD exhaust kit is the perfect way to boost your truck's performance and curb appeal on the open road.
* High Quality Exhaust Kits* Made Of Chrome Plated Steel
* 114 Inch Overall Height
* Kit Includes:
- (2) 8 x 60 Inch West Coast Top Stacks
- (2) 8 Inch OD x 52 Inch Center Section Spools
- (2) 8 To 5 Inch Long Drop 90 Degree Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
- (4) 8 Inch Angled Exhaust Clamp Brackets, Pipe To Cab
- (2) Angled Cab Brackets
- Cab Bracket Hardware
- (8) Exhaust Grommets
* Made In USA
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
***High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Peterbilt Chrome 8 Inch Exhaust Kit W/ 55 Inch Spool & Long Drop 90 Degree Elbows
Bring bold style and superior performance to your Peterbilt 378, 379, or 389 with the TPHD 8-5 X 114 Inch Chrome Exhaust Kit. This high-quality kit includes two 8 X 60 inch West Coast turnout stacks and two 8 X 55 inch spools, delivering a powerful look with efficient exhaust flow. Designed with 8 to 5 inch long drop 90-degree elbows, this system enhances both appearance and airflow while reducing backpressure. Built for durability and easy installation, the kit also features angled pipe-to-cab clamp brackets, Unibilt cab mounts, and eight exhaust grommets to ensure a secure, long-lasting fit. With a brilliant chrome finish and rugged construction, this TPHD exhaust kit is ideal for owner-operators and custom builders who want performance and shine that lasts.
* High Quality Exhaust Kits* Made Of Chrome Plated Steel
* 114 Inch Overall Height
* Kit Includes:
- (2) 8 x 60 Inch West Coast Top Stacks
- (2) 8 Inch OD x 55 Inch Center Section Spools
- (2) 8 To 5 Inch Long Drop 90 Degree Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
- (4) 8 Inch Angled Exhaust Clamp Brackets, Pipe To Cab
- (2) Angled Cab Brackets
- Cab Bracket Hardware
- (8) Exhaust Grommets
* Made In USA
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
***High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
8 Inch Exhaust Kit With 52 Inch Spool & Long Drop 90 Degree Elbows
Introducing TPHD CHROME EXHAUST KITS! These Kits Are Installer-Friendly, Produced With All High Quality Components At An Affordable Price.
* High Quality Exhaust Kits* Made Of Chrome Plated Steel
* 96 Inch Overall Height
* Kit Includes:
- (2) 8 x 44 Inch Flat Top Stacks
- (2) 8 Inch OD x 52 Inch Center Section Spools
- (2) 8 To 5 Inch Long Drop 90 Degree Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
- (1) 5 Inch Taperlock Aluminized Long Drop Elbow
- (2) 5 Inch Band Clamp Flat Stainless Steel
- (4) 8 Inch Angled Exhaust Clamp Brackets, Pipe To Cab
- (2) Angled Cab Brackets
- Cab Bracket Hardware
- (8) Exhaust Grommets
* Made In USA
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
***High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 8 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbows
Introducing TPHD CHROME EXHAUST KITS! These Kits Are Installer-Friendly, Produced With All High Quality Components At An Affordable Price.
* High Quality Exhaust Kits* Made Of Chrome Plated Steel
* 96 Inch Overall Height
* Kit Includes:
- (2) 8 x 44 Inch Flat Top Stacks
- (2) 8 Inch OD x 55 Inch Center Section Spools
- (2) 8 To 5 Inch Long Drop 90 Degree Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
- (1) 5 Inch Taperlock Aluminized Long Drop Elbow
- (2) 5 Inch Band Clamp Flat Stainless Steel
- (4) 8 Inch Angled Exhaust Clamp Brackets, Pipe To Cab
- (2) Angled Cab Brackets
- Cab Bracket Hardware
- (8) Exhaust Grommets
* Made In USA
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
***High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Peterbilt 8 Inch Flat Top Chrome Exhaust Kit W/ 52 Inch Spool
Whether you're rebuilding or customizing your rig, the TPHD 8-5 X 96 Inch Chrome Flat Top Stack Kit is a solid choice for Peterbilt 378 and 379 owners who want power, shine, and quality in one complete package. Two 8 X 44 inch chrome flat top stacks pair with 52 inch spools and long drop elbows for smooth exhaust flow and a bold presence. Complete with angled brackets and grommets, it installs securely and stays put mile after mile. Add polish and performance that lasts with this dependable TPHD upgrade.
* High Quality Exhaust Kits* Made Of Chrome Plated Steel
* 96 Inch Overall Height
* Kit Includes:
- (2) 8 x 44 Inch Flat Top Stacks
- (2) 8 Inch OD x 52 Inch Center Section Spools
- (2) 8 To 5 Inch Long Drop 90 Degree Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
- (4) 8 Inch Angled Exhaust Clamp Brackets, Pipe To Cab
- (2) Angled Cab Brackets
- Cab Bracket Hardware
- (8) Exhaust Grommets
* Made In USA
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
***High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Peterbilt 8 Inch Flat Top Chrome Exhaust Kit W/ 55 Inch Spool
Upgrade your rig with the TPHD 8-5 X 96 Inch Chrome Flat Top Exhaust Kit-designed for Peterbilt 378, 379, and 389 models and built to deliver bold looks and long-lasting performance. This high-quality kit includes two 8 X 44 inch flat top chrome stacks paired with 55 inch center section spools and 8-to-5-inch long drop 90-degree elbows, offering smooth exhaust flow and a clean, aggressive appearance. Whether you're customizing a show truck or adding functional style to your daily driver, this kit comes complete with angled pipe-to-cab clamp brackets, Unibilt-compatible angled cab brackets, and eight exhaust grommets for a secure, durable install. Take your truck's exhaust system to the next level with a dependable setup that combines power, shine, and precision fit.
* High Quality Exhaust Kits* Made Of Chrome Plated Steel
* 96 Inch Overall Height
* Kit Includes:
- (2) 8 x 44 Inch Flat Top Stacks
- (2) 8 Inch OD x 55 Inch Center Section Spools
- (2) 8 To 5 Inch Long Drop 90 Degree Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
- (4) 8 Inch Angled Exhaust Clamp Brackets, Pipe To Cab
- (2) Angled Cab Brackets
- Cab Bracket Hardware
- (8) Exhaust Grommets
* Made In USA
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
***High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 8 Inch Exhaust Kit With 52 Inch Spool & Long Drop 90 Degree Elbows
Introducing TPHD CHROME EXHAUST KITS! These Kits Are Installer-Friendly, Produced With All High Quality Components At An Affordable Price.
* High Quality Exhaust Kits* Made Of Chrome Plated Steel
* 96 Inch Overall Height
* Kit Includes:
- (2) 8 x 44 Inch Miter Top Stacks
- (2) 8 Inch OD x 52 Inch Center Section Spools
- (2) 8 To 5 Inch Long Drop 90 Degree Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
- (1) 5 Inch Taperlock Aluminized Long Drop Elbow
- (2) 5 Inch Band Clamp Flat Stainless Steel
- (4) 8 Inch Angled Exhaust Clamp Brackets, Pipe To Cab
- (2) Angled Cab Brackets
- Cab Bracket Hardware
- (8) Exhaust Grommets
* Made In USA
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
***High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
8 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbows
Introducing TPHD CHROME EXHAUST KITS! These Kits Are Installer-Friendly, Produced With All High Quality Components At An Affordable Price.
* High Quality Exhaust Kits* Made Of Chrome Plated Steel
* 96 Inch Overall Height
* Kit Includes:
- (2) 8 x 44 Inch Miter Top Stacks
- (2) 8 Inch OD x 55 Inch Center Section Spools
- (2) 8 To 5 Inch Long Drop 90 Degree Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
- (1) 5 Inch Taperlock Aluminized Long Drop Elbow
- (2) 5 Inch Band Clamp Flat Stainless Steel
- (4) 8 Inch Angled Exhaust Clamp Brackets, Pipe To Cab
- (2) Angled Cab Brackets
- Cab Bracket Hardware
- (8) Exhaust Grommets
* Made In USA
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
***High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Peterbilt 8 Inch Miter Exhaust Kit W/ 52 Inch Spool
Bring a powerful presence to your Peterbilt 378 or 379 with the TPHD 8-5 X 96 Inch Chrome Miter Stack Exhaust Kit. Engineered for durability and bold style, this high-quality exhaust system features a pair of 8 X 44 inch miter top stacks paired with 52 inch center spools and 8-to-5-inch long drop 90-degree elbows-creating a clean, aggressive profile with dependable performance. This complete kit includes everything you need for a solid install: angled clamp brackets for pipe-to-cab mounting, angled cab brackets compatible with Unibilt sleepers, and eight exhaust grommets. Whether you're upgrading for performance, aesthetics, or both, this chrome miter stack kit ensures your rig stands out while running strong for miles to come.
* High Quality Exhaust Kits* Made Of Chrome Plated Steel
* 96 Inch Overall Height
* Kit Includes:
- (2) 8 x 44 Inch Miter Top Stacks
- (2) 8 Inch OD x 52 Inch Center Section Spools
- (2) 8 To 5 Inch Long Drop 90 Degree Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
- (4) 8 Inch Angled Exhaust Clamp Brackets, Pipe To Cab
- (2) Angled Cab Brackets
- Cab Bracket Hardware
- (8) Exhaust Grommets
* Made In USA
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
***High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Peterbilt 8 Inch Miter Exhaust Kit W/ 55 Inch Spool
For Peterbilt 378, 379, and 389 owners seeking a reliable and stylish exhaust solution, the TPHD 8-5 X 96 Inch Chrome Exhaust Kit with miter stacks and long 90s is an exceptional choice. This high-quality kit includes two 8 X 44 inch miter top stacks and a 55-inch spool, along with all essential mounting hardware for a hassle-free installation. Designed to optimize exhaust flow while providing a striking chrome appearance, this kit offers lasting performance and enhances your truck's visual appeal on every haul.
* High Quality Exhaust Kits* Made Of Chrome Plated Steel
* 96 Inch Overall Height
* Kit Includes:
- (2) 8 x 44 Inch Miter Top Stacks
- (2) 8 Inch OD x 55 Inch Center Section Spools
- (2) 8 To 5 Inch Long Drop 90 Degree Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
- (4) 8 Inch Angled Exhaust Clamp Brackets, Pipe To Cab
- (2) Angled Cab Brackets
- Cab Bracket Hardware
- (8) Exhaust Grommets
* Made In USA
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
***High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
8 Inch Exhaust Kit With 52 Inch Spool & Long Drop 90 Degree Elbows
Introducing TPHD CHROME EXHAUST KITS! These Kits Are Installer-Friendly, Produced With All High Quality Components At An Affordable Price.
* High Quality Exhaust Kits* Made Of Chrome Plated Steel
* 96 Inch Overall Height
* Kit Includes:
- (2) 8 x 44 Inch West Coast Top Stacks
- (2) 8 Inch OD x 52 Inch Center Section Spools
- (2) 8 To 5 Inch Long Drop 90 Degree Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
- (1) 5 Inch Taperlock Aluminized Long Drop Elbow
- (2) 5 Inch Band Clamp Flat Stainless Steel
- (4) 8 Inch Angled Exhaust Clamp Brackets, Pipe To Cab
- (2) Angled Cab Brackets
- Cab Bracket Hardware
- (8) Exhaust Grommets
* Made In USA
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
***High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 8 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbows
Introducing TPHD CHROME EXHAUST KITS! These Kits Are Installer-Friendly, Produced With All High Quality Components At An Affordable Price.
* High Quality Exhaust Kits* Made Of Chrome Plated Steel
* 96 Inch Overall Height
* Kit Includes:
- (2) 8 x 44 Inch West Coast Top Stacks
- (2) 8 Inch OD x 55 Inch Center Section Spools
- (2) 8 To 5 Inch Long Drop 90 Degree Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
- (1) 5 Inch Taperlock Aluminized Long Drop Elbow
- (2) 5 Inch Band Clamp Flat Stainless Steel
- (4) 8 Inch Angled Exhaust Clamp Brackets, Pipe To Cab
- (2) Angled Cab Brackets
- Cab Bracket Hardware
- (8) Exhaust Grommets
* Made In USA
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
***High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Peterbilt Chrome 8 Inch Exhaust Kit W/ 52 Inch Spool & Long Drop 90 Degree Elbows
Boost your Peterbilt 378 or 379's exhaust system with the TPHD 8-5 X 96 Inch Chrome Exhaust Kit, featuring iconic West Coast turnout stacks paired with long drop 90-degree elbows for smooth exhaust flow and a bold appearance. The kit contains two 8 X 44 inch stacks, a 52-inch center section spool, and essential mounting components for hassle-free installation. Made from high-quality chrome, this exhaust kit combines rugged strength and timeless style, perfect for professional drivers looking to make an impact.
* High Quality Exhaust Kits* Made Of Chrome Plated Steel
* 96 Inch Overall Height
* Kit Includes:
- (2) 8 x 44 Inch West Coast Top Stacks
- (2) 8 Inch OD x 52 Inch Center Section Spools
- (2) 8 To 5 Inch Long Drop 90 Degree Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
- (4) 8 Inch Angled Exhaust Clamp Brackets, Pipe To Cab
- (2) Angled Cab Brackets
- Cab Bracket Hardware
- (8) Exhaust Grommets
* Made In USA
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
***High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Peterbilt Chrome 8 Inch Exhaust Kit W/ 55 Inch Spool & Long Drop 90 Degree Elbows
Equip your Peterbilt 378, 379, or 389 with the TPHD 8-5 X 96 Inch Chrome Exhaust Kit, designed for optimal performance and aggressive styling. With signature West Coast turnout stacks and long drop elbows, this kit includes two 8 X 44 inch stacks, a 55-inch spool, angled clamp brackets, and cab mounting hardware to ensure a secure fit. Its durable chrome finish resists rust and wear, providing a reliable and eye-catching exhaust system that meets the demands of professional trucking.
* High Quality Exhaust Kits* Made Of Chrome Plated Steel
* 96 Inch Overall Height
* Kit Includes:
- (2) 8 x 44 Inch West Coast Top Stacks
- (2) 8 Inch OD x 55 Inch Center Section Spools
- (2) 8 To 5 Inch Long Drop 90 Degree Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
- (4) 8 Inch Angled Exhaust Clamp Brackets, Pipe To Cab
- (2) Angled Cab Brackets
- Cab Bracket Hardware
- (8) Exhaust Grommets
* Made In USA
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
***High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Additional Information
Diameter Options: |
8 Inch |
Truck Class: |
Heavy Duty |
Style Options: |
Long Drop |
Material Options: |
Steel |
Make: |
Peterbilt |
Finish Options: |
Chrome-Plated |
Product Type: |
Exhaust |
Availability: |
Ready To Ship |
Degree Options: |
90 |
Cab Style: |
Unibuilt W/ 2 Cab Brackets |
