Description
Are you looking to replace an exhaust? Stop searching, 4 State Trucks and Lincoln Chrome have got you covered. A damaged exhaust has the ability to decrease acceleration and power, increase fuel consumption, and it can cause a gas smell if there is a leak. With Lincoln Chrome, you get an option that is stylish, easy to install, dependable, and a premium performance that your truck would need. There are many customizable options for your preferences, so you get the cut and the length you want. Check out the rest of the Lincoln Chrome exhaust kits to find the best choice for you and your truck.
Fitment
* Fits Peterbilt 378 2005 thru 2007
* Fits Peterbilt 379 2005 thru 2007
* Fits Peterbilt 389 Glider 2008 thru 2023
7 X 108 Inch Flat Top Exhaust Kit W/ 7-5 LD Elbows & 5 Inch Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 5 Inch Diameter x 3 Inch Width Stainless Steel Flat Exhaust Band Clamp With Hardware
(2) 7 x 108 Inch Flat Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 108 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 108 Inch Flat Top Exhaust Kit W/ 7-5 LD Elbows & 5 Inch Chrome Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 108 Inch Flat Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 108 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 108 Inch Flat Top Exhaust Kit W/ 7-7 LD Elbows & 7-5 Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) 7 To 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 7 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 7 x 108 Inch Flat Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 108 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 108 Inch Flat Top Exhaust Kit W/ 7-5 LD Elbows & No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 108 Inch Flat Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 108 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 108 Inch Flat Top Exhaust Kit W/ 7-5 LD Elbows & 5 Alumnzd Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 108 Inch Flat Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 108 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 108 Inch Flat Top Exhaust Kit W/ 7-7 LD Elbows & No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 108 Inch Flat Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 108 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 108 Inch Miter Stack Kit W/ 7-5 LD Elbow, 5 Inch Taperlock Tee, W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 5 Inch Diameter x 3 Inch Width Stainless Steel Flat Exhaust Band Clamp With Hardware
(2) 7 x 108 Inch Miter Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 108 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 108 Inch Miter Stack Kit W/ 7-5 LD Elbow, 5 Inch Chrome Tee, W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 108 Inch Miter Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 108 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 108 Inch Miter Stack Kit W/ 7-7 LD Elbow, 7-5 Taperlock Tee, W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) 7 To 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 7 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 7 x 108 Inch Miter Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 108 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 108 Inch Miter Stack Kit W/ 7-5 LD Elbow, No Tee, W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 108 Inch Miter Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 108 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 108 Inch Miter Stack Kit W/ 7-5 LD Elbow, 5 Inch Alumnzd Tee, W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 108 Inch Miter Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 108 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 108 Inch Miter Stack Kit W/ 7-7 LD Elbow, No Tee, W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 108 Inch Miter Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 108 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 108 Inch Bull Hauler Stack Kit W/ 7-5 LD Elbow, 5 Inch Taperlock Tee, W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 5 Inch Diameter x 3 Inch Width Stainless Steel Flat Exhaust Band Clamp With Hardware
(2) 7 x 108 Inch Bull Hauler Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 108 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 108 Inch Bull Hauler Stack Kit W/ 7-5 LD Elbow, 5 Inch Chrome Tee, W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 108 Inch Bull Hauler Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 108 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 108 Inch Bull Hauler Stack Kit W/ 7-7 LD Elbow, 7-5 Taperlock Tee, W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) 7 To 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 7 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 7 x 108 Inch Bull Hauler Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 108 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 108 Inch Bull Hauler Stack Kit W/ 7-5 LD Elbow, No Tee, W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 108 Inch Bull Hauler Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 108 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 108 Inch Bull Hauler Exhaust Kit W/ 7-5 LD Elbows & 5 Inch Alumnzd Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 108 Inch Bull Hauler Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 108 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 108 Inch Bull Hauler Exhaust Kit W/ 7-7 LD Elbows & No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 108 Inch Bull Hauler Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 108 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 108 Inch Short 30 Exhaust Kit W/ 7-5 LD Elbows & 5 Inch Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 5 Inch Diameter x 3 Inch Width Stainless Steel Flat Exhaust Band Clamp With Hardware
(2) 7 x 108 Inch Short 30 Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 108 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 108 Inch Short 30 Exhaust Kit W/ 7-5 LD Elbows & 5 Inch Chrome Tee, W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 108 Inch Short 30 Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 108 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 108 Inch Short 30 Exhaust Kit W/ 7-7 LD Elbows & 7-5 Taperlock Teel W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) 7 To 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 7 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 7 x 108 Inch Short 30 Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 108 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 108 Inch Short 30 Exhaust Kit W/ 7-5 LD Elbows & No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 108 Inch Short 30 Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 108 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 108 Inch Short 30 Exhaust Kit W/ 7-5 LD Elbows & 5 Inch Alumnzd Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 108 Inch Short 30 Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 108 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 108 Inch Short 30 Exhaust Kit W/ 7-7 LD Elbow & No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 108 Inch Short 30 Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 108 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 108 Inch Curve Exhaust Kit W/ 7-5 LD Elbows & 5 Inch Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 5 Inch Diameter x 3 Inch Width Stainless Steel Flat Exhaust Band Clamp With Hardware
(2) 7 x 108 Inch Curved Turn Out Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 108 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 108 Inch Curve Exhaust Kit W/ 7-5 LD Elbows & 5 Inch Chrome Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 108 Inch Curved Turn Out Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 108 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 108 Inch Curve Exhaust Kit W/ 7-7 LD Elbows & 7-5 Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) 7 To 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 7 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 7 x 108 Inch Curved Turn Out Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 108 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 108 Inch Curve Exhaust Kit W/ 7-5 LD Elbow & No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 108 Inch Curved Turn Out Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 108 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 108 Inch Curve Exhaust Kit W/ 7-5 LD Elbows & 5 Inch Alumnzd Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 108 Inch Curved Turn Out Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 108 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 108 Inch Curve Exhaust Kit W/ 7-7 LD Elbows & No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 108 Inch Curved Turn Out Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 108 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 108 Inch West Coast Exhaust Kit W? 7-5 LD Elbows & 5 Inch Taperlock W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 5 Inch Diameter x 3 Inch Width Stainless Steel Flat Exhaust Band Clamp With Hardware
(2) 7 x 108 Inch West Coast Turnout Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 108 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 108 Inch West Coast Exhaust Kit W/ 7-5 LD Elbows & 5 Inch Chrome Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 108 Inch West Coast Turnout Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 108 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 108 Inch West Coast Exhaust Kit W/ 7-7 LD Elbows & 7-5 Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) 7 To 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 7 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 7 x 108 Inch West Coast Turnout Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 108 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 108 Inch West Coast Exhaust Kit W/ 7-5 LD Elbows & No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 108 Inch West Coast Turnout Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 108 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 108 Inch West Coast Exhaust Kit W/ 7-5 LD Elbows & 5 Inch Alumnzd Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 108 Inch West Coast Turnout Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 108 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 108 Inch West Coast Exhaust Kit W/ 7-7 LD Elbows & No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 108 Inch West Coast Turnout Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 108 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 114 Inch Flat Top Exhaust Kit W/ 7-5 LD Elbows & 5 Inch Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 5 Inch Diameter x 3 Inch Width Stainless Steel Flat Exhaust Band Clamp With Hardware
(2) 7 x 114 Inch Flat Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 114 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 144 Inch Flat Top Exhaust Kit W/ 7-5 LD Elbows & 5 Inch Chrome Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 114 Inch Flat Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 114 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 114 Inch Flat Top Exhaust Kit W/ 7-7 LD Elbows & 7-5 Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) 7 To 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 7 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 7 x 114 Inch Flat Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 114 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 114 Inch Flat Top Exhaust Kit W/ 7-5 LD Elbows & No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 114 Inch Flat Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 114 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 114 Inch Flat Top Exhaust Kit W/ 7-5 LD Elbows & 5 Inch Alumnzd Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 114 Inch Flat Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 114 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 114 Inch Flat Top Exhaust Kit W/ 7-7 LD Elbows & No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 114 Inch Flat Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 114 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 114 Inch Miter Exhaust Kit W/ 7-5 LD Elbows & 5 Inch Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 5 Inch Diameter x 3 Inch Width Stainless Steel Flat Exhaust Band Clamp With Hardware
(2) 7 x 114 Inch Miter Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 114 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 114 Inch Miter Exhaust Kit W/ 7-5 LD Elbows & 5 Inch Chrome Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 114 Inch Miter Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 114 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 114 Inch Miter Exhaust Kit W/ 7-7 LD Elbows & 7-5 Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) 7 To 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 7 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 7 x 114 Inch Miter Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 114 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 114 Inch Miter Exhaust Kit W/ 7-5 LD Elbows & No Tees W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 114 Inch Miter Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 114 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 114 Inch Miter Exhaust Kit W/ 7-5 LD Elbows & 5 Inch Alumnzd Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 114 Inch Miter Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 114 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 114 Inch Miter Exhaust Kit W/ 7-7 LD Elbows & No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 114 Inch Miter Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 114 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 114 Inch Bull Hauler Exhaust Kit W/ 7-5 LD Elbows & 5 Inch Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 5 Inch Diameter x 3 Inch Width Stainless Steel Flat Exhaust Band Clamp With Hardware
(2) 7 x 114 Inch Bull Hauler Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 114 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 114 Inch Bull Hauler Exhaust Kit W/ 7-5 LD Elbows & 5 Inch Chrome Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 114 Inch Bull Hauler Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 114 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 114 Inch Bull Hauler Exhaust Kit W 7-7 LD Elbows & 7-5 Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) 7 To 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 7 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 7 x 114 Inch Bull Hauler Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 114 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 114 Inch Bull Hauler Stack Kit W/ 7-5 LD Elbows & No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 114 Inch Bull Hauler Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 114 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 114 Inch Bull Hauler Exhaust Kit W/ 7-5 LD Elbows & 5 Inch Alumnzd Tee W/O Non-Unibilt By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 114 Inch Bull Hauler Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 114 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 114 Inch Bull Hauler Exhaust Kit W/ 7-7 LD Elbows & No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 114 Inch Bull Hauler Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 114 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 114 Inch Short 30 Exhaust Kit W/ 7-5 LD Elbows & 5 Inch Taperlock W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 5 Inch Diameter x 3 Inch Width Stainless Steel Flat Exhaust Band Clamp With Hardware
(2) 7 x 114 Inch Short 30 Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 114 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 114 Inch Short 30 Exhaust Kit W/ 7-5 LD Elbows & 5 Inch Chrome Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 114 Inch Short 30 Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 114 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 114 Inch Short 30 Exhaust Kit W/ 7-7 LD Elbows & 7-5 Taperlock W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) 7 To 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 7 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 7 x 114 Inch Short 30 Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 114 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 114 Inch Short 30 Exhaust Kit W/ 7-5 LD Elbows & No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 114 Inch Short 30 Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 114 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 114 Inch Short 30 Exhaust Kit W/ 7-5 LD Elbows & 5 Inch Alumzd Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 114 Inch Short 30 Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 114 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 114 Inch Short 30 Exhaust Kit W/ 7-7 LD Elbows & No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 114 Inch Short 30 Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 114 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 114 Inch Curve Exhaust Kit W/ 7-5 LD Elbows & 5 Inch Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 5 Inch Diameter x 3 Inch Width Stainless Steel Flat Exhaust Band Clamp With Hardware
(2) 7 x 114 Inch Curved Turn Out Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 114 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 114 Inch Curve Exhaust Kit W/ 7-5 LD Elbows & 5 Inch Chrome Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 114 Inch Curved Turn Out Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 114 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 114 Inch Curve Exhaust Kit W/ 7-7 LD Elbows & 7-5 Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) 7 To 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 7 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 7 x 114 Inch Curved Turn Out Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 114 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 114 Inch Curve Exhaust Kit W/ 7-5 LD Elbows & No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 114 Inch Curved Turn Out Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 114 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 114 Inch Curve Exhaust Kit 7-5 LD Elbows & 5 Inch Alumzd Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 114 Inch Curved Turn Out Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 114 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 114 Inch Curve Exhaust Kit W/ 7-7 LD Elbows & No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 114 Inch Curved Turn Out Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 114 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 114 Inch West Coast Stack Kit W/ 7-5 LD Elbows, 5 Inch Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 5 Inch Diameter x 3 Inch Width Stainless Steel Flat Exhaust Band Clamp With Hardware
(2) 7 x 114 Inch West Coast Turnout Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 114 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 114 Inch West Coast Stack Kit W/ 7-5 LD Elbows & 5 Inch Chrome Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 114 Inch West Coast Turnout Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 114 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 114 Inch West Coast Stack Kit W/ 7-7 LD Elbows & 7-5 Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) 7 To 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 7 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 7 x 114 Inch West Coast Turnout Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 114 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 114 Inch West Coast Stack Kit W/ 7-5 LD Elbows & No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 114 Inch West Coast Turnout Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 114 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 114 Inch West Coast Stack Kit W/ 7-5 LD Elbows & 5 Inch Alumzd Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 114 Inch West Coast Turnout Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 114 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 114 Inch West Coast Stack Kit W/ 7-7 LD Elbows & No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 114 Inch West Coast Turnout Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 114 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 120 Inch Flat Top Stack Kit W/ 7-5 LD Elbows, 5 Inch Taper Lock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 5 Inch Diameter x 3 Inch Width Stainless Steel Flat Exhaust Band Clamp With Hardware
(2) 7 x 120 Inch Flat Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 120 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 120 Inch Flat Top Stack Kit W/ 7-5 LD Elbows, 5 Inch Chrome Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 120 Inch Flat Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 120 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 120 Inch Flat Top Stack Kit W/ 7-7 LD Elbows & 7-5 Taper Lock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) 7 To 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 7 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 7 x 120 Inch Flat Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 120 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 120 Inch Flat Top Stack Kit W/ 7-5 LD Elbows & No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 120 Inch Flat Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 120 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 120 Inch Flat Top Stack Kit W/ 7-5 LD Elbows, 5 Inch Alumzd Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 120 Inch Flat Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 120 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 120 Inch Flat Top Stack Kit W/ 7-7 LD Elbows & No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 120 Inch Flat Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 120 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 120 Inch Miter Stack Kit W/ 7-5 LD Elbows & 5 Inch Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 5 Inch Diameter x 3 Inch Width Stainless Steel Flat Exhaust Band Clamp With Hardware
(2) 7 x 120 Inch Miter Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 120 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 120 Inch Miter Stack Kit W/ 7-5 LD Elbows & 5 Inch Chrome Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 120 Inch Miter Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 120 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 120 Inch Miter Stack Kit W/ 7-7 LD Elbows & 7-5 Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) 7 To 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 7 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 7 x 120 Inch Miter Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 120 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 120 Inch Miter Stack Kit W/ 7-5 LD Elbows & No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 120 Inch Miter Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 120 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 120 Inch Miter Stack Kit W/ 7-5 LD Elbows, 5 Inch Alumzd Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 120 Inch Miter Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 120 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 120 Inch Miter Stack Kit W/ 7-7 LD Elbows & No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 120 Inch Miter Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 120 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 120 Inch Bull Hauler Stack Kit W/ 7-5 LD Elbows & 5 Inch Taperlock W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 5 Inch Diameter x 3 Inch Width Stainless Steel Flat Exhaust Band Clamp With Hardware
(2) 7 x 120 Inch Bullhorn Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 120 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 120 Inch Bull Hauler Stack Kit W/ 7-5 LD Elbows & 5 Inch Chrome Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(2) 7 x 120 Inch Bullhorn Top Stack, Chrome Plated Steel
(2) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 120 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 120 Inch Bull Hauler Stack Kit W/ 7-7 LD Elbows & 7-5 Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) 7 To 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 7 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 7 x 120 Inch Bullhorn Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 120 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 120 Inch Bull Hauler Stack Kit W/ 7-5 LD Elbows & No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 120 Inch Bullhorn Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 120 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 120 Inch Bull Hauler Stack Kit W/ 7-5 LD Elbows & 5 Inch Alumzd Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(2) 7 x 120 Inch Bullhorn Top Stack, Chrome Plated Steel
(2) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 120 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 120 Inch Bull Hauler Stack Kit W/ 7-7 LD Elbows & No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 120 Inch Bullhorn Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 120 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 120 Inch Short 30 Stack Kit W/ 7-5 LD Elbows & 5 Inch Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 5 Inch Diameter x 3 Inch Width Stainless Steel Flat Exhaust Band Clamp With Hardware
(2) 7 x 120 Inch Short 30 Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 120 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 120 Inch Short 30 Stack Kit W/ 7-5 LD Elbows & 5 Inch Chrome Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 120 Inch Short 30 Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 120 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 120 Inch Short 30 Stack Kit W/ 7-7 LD Elbows & 7-5 Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) 7 To 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 7 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 7 x 120 Inch Short 30 Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 120 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 120 Inch Short 30 Stack Kit W/ 7-5 LD Elbows & No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 120 Inch Short 30 Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 120 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 120 Inch Short 30 Stack Kit W/ 7-5 LD Elbows & 5 Inch Alumzd Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 120 Inch Short 30 Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 120 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 120 Inch Short 30 Stack Kit W/ 7-7 LD Elbows & No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 120 Inch Short 30 Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 120 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 120 Inch Curve Stack Kit W/ 7-5 LD Elbows & 5 Inch Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 5 Inch Diameter x 3 Inch Width Stainless Steel Flat Exhaust Band Clamp With Hardware
(2) 7 x 120 Inch Curved Turn Out Top Stack
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 120 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 120 Inch Curve Stack Kit W/ 7-5 LD Elbows & 5 Inch Chrome Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(2) 7 x 120 Inch Curved Turn Out Top Stack
(2) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 120 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 120 Inch Curve Stack Kit W/ 7-7 LD Elbows & 7-5 TaperLock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) 7 To 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 7 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 7 x 120 Inch Curved Turn Out Top Stack
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 120 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 120 Inch Curve Stack Kit W/ 7-5 LD Elbows & No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 120 Inch Curved Turn Out Top Stack
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 120 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 120 Inch Curve Stack Kit W/ 7-5 LD Elbows & 5 Inch Alumzd Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(2) 7 x 120 Inch Curved Turn Out Top Stack
(2) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 120 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 120 Inch Curve Stack Kit W/ 7-7 LD Elbows & No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 120 Inch Curved Turn Out Top Stack
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 120 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 120 Inch West Coast Stack Kit W/ 7-5 LD Elbows & 5 Inch Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 5 Inch Diameter x 3 Inch Width Stainless Steel Flat Exhaust Band Clamp With Hardware
(2) 7 x 120 Inch West Coast Turnout Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 120 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 120 Inch West Coast Stack Kit W/ 7-5 LD Elbows & 5 Inch Chrome Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 120 Inch West Coast Turnout Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 120 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 120 Inch West Coast Stack Kit W/ 7-7 LD Elbows & 7-5 Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) 7 To 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 7 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 7 x 120 Inch West Coast Turnout Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 120 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 120 Inch West Coast Stack Kit W/ 7-5 LD Elbows & No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 120 Inch West Coast Turnout Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 120 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 120 Inch West Coast Stack Kit W/ 7-5 LD Elbows & 5 Inch Alumzd Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 120 Inch West Coast Turnout Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 120 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 120 Inch West Coast Stack Kit W/ 7-7 LD Elbows & No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 120 Inch West Coast Turnout Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 120 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 72 Inch Flat Top Stack Kit W/ 7-5 LD Elbows & 5 Inch Taperlock Tee W/O Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 5 Inch Diameter x 3 Inch Width Stainless Steel Flat Exhaust Band Clamp With Hardware
(2) 7 x 72 Inch Flat Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 72 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 72 Inch Flat Top Stack Kit W/ 7-5 LD Elbows & 5 Inch Chrome Tee W/O Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 72 Inch Flat Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 72 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 72 Inch Flat Top Stack Kit W/ 7-7 LD Elbows & 7-5 Taperlock Tee W/O Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) 7 To 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 7 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 7 x 72 Inch Flat Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 72 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 72 Inch Flat Top Stack Kit W/ 7-5 LD Elbows & No Tee W/O Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 72 Inch Flat Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 72 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 72 Inch Flat Top Stack Kit W/ 7-5 LD Elbows & 5 Inch Alumzd Tee W/O Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 72 Inch Flat Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 72 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 72 Inch Flat Top Stack Kit W/ 7-7 LD Elbows & No Tee W/O Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 72 Inch Flat Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 72 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 72 Inch Miter Stack Kit W/ 7-5 LD Elbows & 5 Inch Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 5 Inch Diameter x 3 Inch Width Stainless Steel Flat Exhaust Band Clamp With Hardware
(2) 7 x 72 Inch Miter Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 72 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 72 Inch Miter Stack Kit W/ 7-5 LD Elbows & 5 Inch Chrome Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(2) 7 x 72 Inch Miter Top Stack, Chrome Plated Steel
(2) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 72 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 72 Inch Miter Stack Kit W/ 7-7 LD Elbows & 7-5 Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) 7 To 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 7 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 7 x 72 Inch Miter Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 72 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 72 Inch Miter Stack Kit W/ 7-5 LD Elbows & No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 72 Inch Miter Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 72 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 72 Inch Miter Stack Kit W/ 7-5 LD Elbows & 5 Inch Alumzd Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(2) 7 x 72 Inch Miter Top Stack, Chrome Plated Steel
(2) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 72 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 72 Inch Miter Stack Kit W/ 7-7 LD Elbows & No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 72 Inch Miter Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 72 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 72 Inch Bull Hauler Stack Kit W/ 7-5 LD Elbows, 5 Inch Taper Lock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 5 Inch Diameter x 3 Inch Width Stainless Steel Flat Exhaust Band Clamp With Hardware
(2) 7 x 72 Inch Bullhorn Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 72 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 72 Inch Bull Hauler Stack Kit W/ 7-5 LD Elbows, 5 Inch Chrome Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(2) 7 x 72 Inch Bullhorn Top Stack, Chrome Plated Steel
(2) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 72 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 72 Inch Bull Hauler Stack Kit W/ 7-7 LD Elbows, 7-5 Inch Taper Lock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) 7 To 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 7 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 7 x 72 Inch Bullhorn Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 72 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 72 Inch Bull Hauler Stack Kit W/ 7-5 LD Elbows No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 72 Inch Bullhorn Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 72 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 72 Inch Bull Hauler Stack Kit W/ 7-5 LD Elbows, 5 Inch Alumzd Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(2) 7 x 72 Inch Bullhorn Top Stack, Chrome Plated Steel
(2) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 72 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 72 Inch Bull Hauler Stack Kit W/ 7-7 LD Elbows No Tee W/O Cab Brackets By Lincoln Chrome FIts Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 72 Inch Bullhorn Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 72 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 72 Inch Short 30 Stack Kit W/ 7-5 LD Elbows, 5 Inch Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 5 Inch Diameter x 3 Inch Width Stainless Steel Flat Exhaust Band Clamp With Hardware
(2) 7 x 72 Inch Short 30 Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 72 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 72 Inch Short 30 Stack Kit W/ 7-5 LD Elbows, 5 Inch Chrome Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(2) 7 x 72 Inch Short 30 Top Stack, Chrome Plated Steel
(2) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 72 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 72 Inch Short 30 Stack Kit W/ 7-7 LD Elbows, 7-5 Inch Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) 7 To 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 7 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 7 x 72 Inch Short 30 Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 72 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 72 Inch Short 30 Stack Kit W/ 7-5 LD Elbows No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 72 Inch Short 30 Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 72 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 72 Inch Short 30 Stack Kit W/ 7-5 LD Elbows, 5 Inch Alumzd Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(2) 7 x 72 Inch Short 30 Top Stack, Chrome Plated Steel
(2) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 72 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 72 Inch Short 30 Stack Kit W/ 7-7 LD Elbows No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 72 Inch Short 30 Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 72 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 72 Inch Curve Stack Kit W/ 7-5 LD Elbows, 5 Inch Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 5 Inch Diameter x 3 Inch Width Stainless Steel Flat Exhaust Band Clamp With Hardware
(2) 7 x 72 Inch Curved Turn Out Top Stack
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 72 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 72 Inch Curve Stack Kit W/ 7-5 LD Elbows, 5 Inch Chrome Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(2) 7 x 72 Inch Curved Turn Out Top Stack
(2) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 72 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 72 Inch Curve Stack Kit W/ 7-7 LD Elbows, 7-5 Inch Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) 7 To 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 7 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 7 x 72 Inch Curved Turn Out Top Stack
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 72 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 72 Inch Curve Stack Kit W/ 7-5 LD Elbows, No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 72 Inch Curved Turn Out Top Stack
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 72 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 72 Inch Curve Stack Kit W/ 7-5 LD Elbows, 5 Inch Alumzd Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(2) 7 x 72 Inch Curved Turn Out Top Stack
(2) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 72 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 72 Inch Curve Stack Kit W/ 7-7 LD Elbows No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 72 Inch Curved Turn Out Top Stack
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 72 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 72 Inch West Coast Stack Kit W/ 7-5 LD Elbows, 5 Inch Taperlock Tee W/O Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 5 Inch Diameter x 3 Inch Width Stainless Steel Flat Exhaust Band Clamp With Hardware
(2) 7 x 72 Inch West Coast Turnout Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 72 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 72 Inch West Coast Stack Kit W/ 7-5 LD Elbows, 5 Inch Chrome Tee W/O Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 72 Inch West Coast Turnout Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 72 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 72 Inch West Coast Stack Kit W/ 7-7 LD Elbows, 7-5 Inch Taperlock Tee W/O Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) 7 To 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 7 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 7 x 72 Inch West Coast Turnout Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 72 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 72 Inch West Coast Stack Kit W/ 7-5 LD Elbows No Tee W/O Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 72 Inch West Coast Turnout Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 72 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 72 Inch West Coast Stack Kit W/ 7-5 LD Elbows, 5 Inch Alumzd Tee W/O Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 72 Inch West Coast Turnout Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 72 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 72 Inch West Coast Stack Kit W/ 7-7 LD Elbows, W/O Tee W/O Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 72 Inch West Coast Turnout Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 72 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 84 Inch Flat Top Stack Kit W/ 7-5 LD Elbows, 5 Inch Taperlock Tee W/O Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 5 Inch Diameter x 3 Inch Width Stainless Steel Flat Exhaust Band Clamp With Hardware
(2) 7 x 84 Inch Flat Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 84 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 84 Inch Flat Top Stack Kit W/ 7-5 LD Elbows, 5 Inch Chrome Tee W/O Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 84 Inch Flat Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 84 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 84 Inch Flat Top Stack Kit W/ 7-7 LD Elbows, 7-5 Inch Taperlock Tee W/O Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) 7 To 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 7 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 7 x 84 Inch Flat Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 84 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 84 Inch Flat Top Stack Kit W/ 7-5 LD Elbows No Tee W/O Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 84 Inch Flat Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 84 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 84 Inch Flat Top Stack Kit W/ 7-5 LD Elbows, 5 Inch Alumzd Tee W/O Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 84 Inch Flat Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 84 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 84 Inch Flat Top Stack Kit W/ 7-7 LD Elbows No Tee W/O Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 84 Inch Flat Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 84 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 84 Inch Miter Stack Kit W/ 7-5 LD Elbows, 5 Inch Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 5 Inch Diameter x 3 Inch Width Stainless Steel Flat Exhaust Band Clamp With Hardware
(2) 7 x 84 Inch Miter Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 84 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 84 Inch Miter Stack Kit W/ 7-5 LD Elbows, 5 Inch Chrome Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 84 Inch Miter Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 84 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 84 Inch Miter Stack Kit W/ 7-7 LD Elbows, 7-5 Inch Taper Lock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) 7 To 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 7 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 7 x 84 Inch Miter Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 84 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 84 Inch Miter Stack Kit W/ 7-5 LD Elbows No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 84 Inch Miter Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 84 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 84 Inch Miter Stack Kit W/ 7-5 LD Elbows, 5 Inch Alumzd Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 84 Inch Miter Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 84 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 84 Inch Miter Stack Kit W/ 7-7 LD Elbows No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 84 Inch Miter Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 84 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 84 Inch Bull Hauler Stack Kit W/ 7-7 LD Elbows, 5 Inch Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 5 Inch Diameter x 3 Inch Width Stainless Steel Flat Exhaust Band Clamp With Hardware
(2) 7 x 84 Inch Bullhorn Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 84 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 84 Inch Bull Hauler Stack Kit W/ 7-5 LD Elbows, 5 Inch Chrome Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(2) 7 x 84 Inch Bullhorn Top Stack, Chrome Plated Steel
(2) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 84 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 84 Inch Bull Hauler Stack Kit W/ 7-7 LD Elbows, 7-5 Inch Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) 7 To 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 7 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 7 x 84 Inch Bullhorn Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 84 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 84 Inch Bull Hauler Stack Kit W/ 7-5 LD Elbows No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 84 Inch Bullhorn Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 84 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 84 Inch Bull Hauler Stack Kit W/ 7-5 LD Elbows, 5 Inch Alumzd Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(2) 7 x 84 Inch Bullhorn Top Stack, Chrome Plated Steel
(2) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 84 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 84 Inch Bull Hauler Stack Kit W/ 7-7 LD Elbows No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 84 Inch Bullhorn Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 84 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 84 Inch Short 30 Stack Kit W/ 7-5 LD Elbows, 5 Inch Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 5 Inch Diameter x 3 Inch Width Stainless Steel Flat Exhaust Band Clamp With Hardware
(2) 7 x 84 Inch Short 30 Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 84 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 84 Inch Short 30 Stack Kit W/ 7-5 LD Elbows, 5 Inch Chrome Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 84 Inch Short 30 Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 84 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 84 Inch Short 30 Stack Kit W/ 7-7 LD Elbows, 7-5 Inch Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) 7 To 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 7 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 7 x 84 Inch Short 30 Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 84 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 84 Inch Short 30 Stack Kit W/ 7-5 LD Elbows No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 84 Inch Short 30 Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 84 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 84 Inch Short 30 Stack Kit W/ 7-5 LD Elbows, 5 Inch Alumzd Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 84 Inch Short 30 Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 84 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 84 Inch Short 30 Stack Kit W/ 7-7 LD Elbows No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 84 Inch Short 30 Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 84 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 84 Inch Curve Stack Kit W/ 7-5 LD Elbows, 5 Inch Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 5 Inch Diameter x 3 Inch Width Stainless Steel Flat Exhaust Band Clamp With Hardware
(2) 7 x 84 Inch Curved Turn Out Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 84 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 84 Inch Curve Stack Kit W/ 7-5 LD Elbows, 5 Inch Chrome Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 84 Inch Curved Turn Out Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 84 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 84 Inch Curve Stack Kit W/ 7-7 LD Elbows, 7-5 Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) 7 To 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 7 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 7 x 84 Inch Curved Turn Out Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 84 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 84 Inch Curve Stack Kit W/ 7-5 LD Elbows No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 84 Inch Curved Turn Out Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 84 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 84 Inch Curve Stack Kit W/ 7-5 LD Elbows, 5 Inch Alumzd Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 84 Inch Curved Turn Out Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 84 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 84 Inch Curve Stack Kit W/ 7-7 LD Elbows No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 84 Inch Curved Turn Out Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 84 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 84 Inch West Coast Stack Kit W/ 7-5 LD Elbows, 5 Inch Taper Lock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 5 Inch Diameter x 3 Inch Width Stainless Steel Flat Exhaust Band Clamp With Hardware
(2) 7 x 84 Inch West Coast Turnout Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 84 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 84 Inch West Coast Stack Kit W/ 7-5 LD Elbows, 5 Inch Chrome Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 84 Inch West Coast Turnout Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 84 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 84 Inch West Coast Stack Kit W/ 7-7 LD Elbows, 7-5 Inch Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) 7 To 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 7 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 7 x 84 Inch West Coast Turnout Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 84 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 84 Inch West Coast Stack Kit W/ 7-5 LD Elbows No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 84 Inch West Coast Turnout Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 84 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 84 Inch West Coast Stack Kit W/ 7-5 LD Elbows, 5 Inch Alumzd Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 84 Inch West Coast Turnout Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 84 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 84 Inch West Coast Stack Kit W/ 7-7 LD Elbows, W/O Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 84 Inch West Coast Turnout Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 84 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 96 Inch Flat Top Stack Kit W/ 7-5 LD Elbows, 5 Inch Taper Lock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 5 Inch Diameter x 3 Inch Width Stainless Steel Flat Exhaust Band Clamp With Hardware
(2) 7 x 96 Inch Flat Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 96 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 96 Inch Flat Top Stack Kit W/ 7-5 LD Elbows, 5 Inch Chrome Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 96 Inch Flat Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 96 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 96 Inch Flat Top Stack Kit W/ 7-7 LD Elbows, 7-5 Inch Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) 7 To 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 7 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 7 x 96 Inch Flat Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 96 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 96 Inch Flat Top Stack Kit W/ 7-5 LD Elbows No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 96 Inch Flat Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 96 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 96 Inch Flat Top Stack Kit W/ 7-5 LD Elbows, 5 Inch Alumzd Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 96 Inch Flat Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 96 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 96 Inch Flat Top Stack Kit W/ 7-7 LD Elbows No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 96 Inch Flat Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 96 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 97 Inch Miter Stack Kit W/ 7-5 LD Elbows, 5 Inch Taper Lock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 5 Inch Diameter x 3 Inch Width Stainless Steel Flat Exhaust Band Clamp With Hardware
(2) 7 x 96 Inch Miter Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 96 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 97 Inch Miter Stack Kit W/ 7-5 LD Elbows, 5 Inch Chrome Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 96 Inch Miter Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 96 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 97 Inch Miter Stack Kit W/ 7-7 LD Elbows, 7-5 Inch Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) 7 To 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 7 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 7 x 96 Inch Miter Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 96 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 97 Inch Miter Stack Kit W/ 7-5 LD Elbows No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 96 Inch Miter Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 96 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 96 Inch Miter Stack Kit W/ 7-5 LD Elbows, 5 Inch Alumzd Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 96 Inch Miter Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 96 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 96 Inch Miter Stack Kit W/ 7-7 LD Elbows, No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 96 Inch Miter Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 96 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 96 Inch Bull Hauler Stack Kit W/ 7-5 LD Elbows, 5 Inch Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 5 Inch Diameter x 3 Inch Width Stainless Steel Flat Exhaust Band Clamp With Hardware
(2) 7 x 96 Inch Bull Hauler Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 96 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 96 Inch Bull Hauler Stack Kit W/ 7-5 LD Elbows, 5 Inch Chrome Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 96 Inch Bull Hauler Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 96 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 96 Inch Bull Hauler Stack Kit W/ 7-7 LD Elbows, 7-5 Inch Taper Lock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) 7 To 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 7 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 7 x 96 Inch Bull Hauler Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 96 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 96 Inch Bull Hauler Stack Kit W/ 7-5 LD Elbows No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 96 Inch Bull Hauler Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 96 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 96 Inch Bull Hauler Stack Kit W/ 7-5 LD Elbows, 5 Inch Alumzd Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 96 Inch Bull Hauler Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 96 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 96 Inch Bull Hauler Stack Kit W/ 7-7 LD Elbows No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 96 Inch Bull Hauler Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 96 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 96 Inch Short 30 Stack Kit W/ 7-5 LD Elbows, 5 Inch Taper Lock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 5 Inch Diameter x 3 Inch Width Stainless Steel Flat Exhaust Band Clamp With Hardware
(2) 7 x 96 Inch Short 30 Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 96 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 97 Inch Short 30 Stack Kit W/ 7-5 LD Elbows, 5 Inch Chrome Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 96 Inch Short 30 Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 96 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 97 Inch Short 30 Stack Kit W/ 7-7 LD Elbows, 7-5 Inch Taper Lock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) 7 To 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 7 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 7 x 96 Inch Short 30 Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 96 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 96 Inch Short 30 Stack Kit W/ 7-5 LD Elbows, No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 96 Inch Short 30 Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 96 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 97 Inch Short 30 Stack Kit W/ 7-5 LD Elbows, 5 Inch Alumzd Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 96 Inch Short 30 Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 96 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 97 Inch Short 30 Stack Kit W/ 7-7 LD Elbows, No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 96 Inch Short 30 Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 96 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 97 Inch Curve Stack Kit W/ 7-5 LD Elbows, 5 Inch Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 5 Inch Diameter x 3 Inch Width Stainless Steel Flat Exhaust Band Clamp With Hardware
(2) 7 x 96 Inch Curved Turn Out Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 96 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 96 Inch Curve Stack Kit W/ 7-5 LD Elbows, 5 Inch Chrome Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 96 Inch Curved Turn Out Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 96 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 97 Inch Curve Stack Kit W/ 7-7 LD Elbows, 7-5 Inch Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) 7 To 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 7 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 7 x 96 Inch Curved Turn Out Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 96 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 96 Inch Curve Stack Kit W/ 7-5 LD Elbows, No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 96 Inch Curved Turn Out Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 96 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 96 Inch Curve Stack Kit W/ 7-5 LD Elbows, 5 Inch Alumzd Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 96 Inch Curved Turn Out Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 96 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 97 Inch Curve Stack Kit W/ 7-7 LD Elbows No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 96 Inch Curved Turn Out Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 96 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 97 Inch West Coast Stack Kit W/ 7-5 LD Elbows, 5 Inch Taper Lock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 5 Inch Diameter x 3 Inch Width Stainless Steel Flat Exhaust Band Clamp With Hardware
(2) 7 x 96 Inch West Coast Turnout Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 96 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 96 Inch West Coast Stack Kit W/ 7-5 LD Elbows, 5 Inch Chrome Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 96 Inch West Coast Turnout Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 96 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 97 Inch West Coast Stack Kit W/ 7-7 LD Elbows, 7-5 Inch Taperlock Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) 7 To 5 Inch ID/OD/OD Y-Pipe, (2) 90 Degree Bends, Chrome Plated Steel
(1) Exhaust Grommets (Set Of 8)
(2) 7 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 7 x 96 Inch West Coast Turnout Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 96 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 96 Inch West Coast Stack Kit W/ 7-5 LD Elbows No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 96 Inch West Coast Turnout Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 96 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 96 Inch West Coast Stack Kit W/ 7-5 LD Elbows, 5 Inch Alumzd Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 To 5 Inch 90 Degree Long Drop Elbows (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 7 x 96 Inch West Coast Turnout Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 96 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
7 X 97 Inch West Coast Stack Kit W/ 7-7 LD Elbows No Tee W/O Cab Brackets By Lincoln Chrome Fits Peterbilt 378, 379 & 389 Glider Non-Unibilt
*High Quality Exhaust Kit*Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 7 Inch Angled Exhaust Clamp Bracket, 3 Inch Width
(2) 7 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(1) Exhaust Grommets (Set Of 8)
(2) 7 x 96 Inch West Coast Turnout Top Stack, Chrome Plated Steel
* Made Of Chrome Plated Steel
* Dimensions:
- 7 Inch Diameter
- 96 Inch Overall Height
* Sold As Kit
* Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
** This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.**
Additional Information
Finish Options: |
Chrome-Plated |
Material Options: |
Steel |
Diameter Options: |
7 Inch |
Style Options: |
Curve Turn |
Location: |
Made In USA |
Style Options: |
West Coast Turn |
Style Options: |
Bull Hauler Turn |
Style Options: |
Short 30 Turn |
Height Options: |
114 Inch |
Product Type: |
Exhaust |
Style Options: |
Miter Cut |
Height Options: |
108 Inch |
Position: |
Kit Full |
Style Options: |
Flat Top |
Make: |
Peterbilt |
Cab Style: |
Non Unibilt |
Height Options: |
96 Inch |
Height Options: |
120 Inch |
Height Options: |
84 Inch |
Height Options: |
72 Inch |
Availability: |
Ready To Ship |
