Load-Share Steer Axle Air Ride Upgrade Kit - Without Shocks For Peterbilt 365, 367, 386, 388, 389

Peterbilt Steer Axle Air Ride Upgrade Kit

Upgrade your Peterbilt's suspension with this direct-fit air ride kit. Four premium air bags and complete mounting hardware deliver better ride quality than factory setup. Install the bolt-on components without drilling, connect to existing air lines, and experience improved drop capability.

* High Quality Steer Axle Air Ride Kit
* Double Air Bag Suspension System
* Kit Includes:
  - (4) Double Convoluted Air Springs
  - (4) Angle Brackets With Gussets
  - (4) Discs
  - Mounting Hardware
* Shock Absorber Not Included
* Factory Bolt Mount Is Not Included
* Fits Peterbilt 365 & 367 (2008 - 2024), 386 (2008 - 2016), 388 (2008 - 2014), 389 (2008 - 2025)
** Fits Above Models With Factory Air Ride Steer Axles Only**
* Bolt-On Mount
* Sold As Kit
** Warning: Do Not Inflate Assembly When It Is Unrestricted. Assembly Must Be Restricted By Suspension Or Other Adequate Structure. Do Not Inflate Beyond 100 PSI. Improper Use Or Over-Inflation May Cause Assembly To Burst, Causing Property Damage And/Or Severe Personal Injury.
With A Load On Your Truck And The Air Springs Inflated, You Must Have At Least One Inch Clearance All Around The Air Bellows. For Best Ride Use Only Enough Air Pressure In The Air Springs To Level The Vehicle When Viewed From The Side. Inflate The Air Springs To Maintain This Height Under Any Conditions Of Load. Too Much Air Pressure In The Air Springs Will Result In A Stiffer Ride. Too Little Air Pressure Will Allow The Vehicle To Bottom Out And Not Provide The Improvement In Handling That Is Possible. To Prevent Possible Damage, Always Maintain A Minimum Of 2 PSI In The Load-Share Bellows.
* Warranty On Steer Axle Air Ride Kits Against Defects In Workmanship & Material From Date Of Purchase

Load-Share Steer Axle Air Ride Upgrade Kit With Monroe Shocks For Peterbilt 365, 367, 386, 388, 389

Peterbilt Steer Premium Air Ride Upgrade Kit

Load Share Suspension's direct-fit air ride upgrade package enhances Peterbilt truck suspension performance. Complete bolt-on kit includes Monroe shocks, 4 premium air bags, and mounting hardware. Designed specifically for new model Peterbilt trucks, this suspension upgrade delivers improved ride quality and increased drop capability.

* High Quality Steer Axle Air Ride Kit
* Double Air Bag Suspension System
* Kit Includes:
  - (4) Double Convoluted Air Springs
  - (4) Angle Brackets With Gussets
  - (4) Discs
  - Monroe Shock Absorber
  - Mounting Hardware
* Factory Bolt Mount Is Not Included
* Fits Peterbilt 365 & 367 (2008 - 2024), 386 (2008 - 2016), 388 (2008 - 2014), 389 (2008 - 2025)
** Fits Above Models With Factory Air Ride Steer Axles Only**
* Bolt-On Mount
* Sold As Kit
** Warning: Do Not Inflate Assembly When It Is Unrestricted. Assembly Must Be Restricted By Suspension Or Other Adequate Structure. Do Not Inflate Beyond 100 PSI. Improper Use Or Over-Inflation May Cause Assembly To Burst, Causing Property Damage And/Or Severe Personal Injury.
With A Load On Your Truck And The Air Springs Inflated, You Must Have At Least One Inch Clearance All Around The Air Bellows. For Best Ride Use Only Enough Air Pressure In The Air Springs To Level The Vehicle When Viewed From The Side. Inflate The Air Springs To Maintain This Height Under Any Conditions Of Load. Too Much Air Pressure In The Air Springs Will Result In A Stiffer Ride. Too Little Air Pressure Will Allow The Vehicle To Bottom Out And Not Provide The Improvement In Handling That Is Possible. To Prevent Possible Damage, Always Maintain A Minimum Of 2 PSI In The Load-Share Bellows.
* Warranty On Steer Axle Air Ride Kits Against Defects In Workmanship & Material From Date Of Purchase

** This Item Is Special Order. This Item Will Not Be Able To Be Canceled And Is Non-Returnable.

Load-Share Steer Axle Air Ride Upgrade Kit With Cargo Max Shocks For Peterbilt 365, 367, 386, 388, 389

Complete Peterbilt Steer Axle Air Ride Upgrade

Peterbilt Steer Axle Air Ride Kit with Cargo Max shocks. Complete bolt-on package replaces factory air bags. Includes all hardware and fittings for direct installation. No drilling required.

* High Quality Steer Axle Air Ride Kit
* Double Air Bag Suspension System
* Kit Includes:
  - (4) Double Convoluted Air Springs
  - (4) Angle Brackets With Gussets
  - (4) Discs
  - Cargo Max Shocks
  - Mounting Hardware
* Factory Bolt Mount Is Not Included
* Fits Peterbilt 365 & 367 (2008 - 2024), 386 (2008 - 2016), 388 (2008 - 2014), 389 (2008 - 2025)
** Fits Above Models With Factory Air Ride Steer Axles Only**
* Bolt-On Mount
* Sold As Kit
** Warning: Do Not Inflate Assembly When It Is Unrestricted. Assembly Must Be Restricted By Suspension Or Other Adequate Structure. Do Not Inflate Beyond 100 PSI. Improper Use Or Over-Inflation May Cause Assembly To Burst, Causing Property Damage And/Or Severe Personal Injury.
With A Load On Your Truck And The Air Springs Inflated, You Must Have At Least One Inch Clearance All Around The Air Bellows. For Best Ride Use Only Enough Air Pressure In The Air Springs To Level The Vehicle When Viewed From The Side. Inflate The Air Springs To Maintain This Height Under Any Conditions Of Load. Too Much Air Pressure In The Air Springs Will Result In A Stiffer Ride. Too Little Air Pressure Will Allow The Vehicle To Bottom Out And Not Provide The Improvement In Handling That Is Possible. To Prevent Possible Damage, Always Maintain A Minimum Of 2 PSI In The Load-Share Bellows.
* Warranty On Steer Axle Air Ride Kits Against Defects In Workmanship & Material From Date Of Purchase

** This Item Is Special Order. This Item Will Not Be Able To Be Canceled And Is Non-Returnable.