Description
Make your ride stand out with the 18-inch chrome Texas rolled end bumper, a top replacement solution for select Kenworth applications. Built from chrome-plated steel and manufactured in the USA by Valley Chrome Plating, this bumper is intended for drivers who want a strong yet polished upgrade for their setup. Its Texas rolled end design creates a smooth, rounded edge profile that delivers a slightly more refined appearance compared to boxed styles while still maintaining a rugged, work-ready look. The bumper is sold individually and includes pre-cut mounting provisions for installation, though hardware is not included and must be purchased separately. Fitment can vary depending on the exact model year and configuration, so confirming the correct bolt-hole pattern before ordering is recommended. As an aftermarket replacement part rather than OEM, it is commonly used for repairs after front-end damage or for visual upgrades that enhance chrome presence on the truck.
Fitment
* Fits Kenworth K100E Cabover 1985 thru 2000
Valley Chrome Texas Rolled End Bumper Fits Kenworth K100E Cabover
* High Quality Replacement Bumper* Made Of 7-Gauge (3/16 Inch Thick) Chrome-Plated Steel
* Has Cutouts For
- Mounting Holes
* 18 Inch Texas Square
* Does Not Include Mounting Bolts, Washers Or Hardware - Sold Separately
* Made In USA
* Sold Individually
* Warranty on Bumper Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM) ***
** This Item Is Special Order. This Item Will Not Be Able To Be Canceled And Is Non-Returnable.
* Please Verify Mounting Hole Pattern, Some Year Models Can Have Multiple Offerings.
Valley Chrome Texas Rolled End Bumper W/ 4 Oval Light Holes Fits Kenworth K100E Cabover
* High Quality Replacement Bumper* Made Of 7-Gauge (3/16 Inch Thick) Chrome-Plated Steel
* Has Cutouts For
- Mounting Holes
- 4 Oval Light Holes, 2 On Each Side
* 18 Inch Texas Square
* Does Not Include Mounting Bolts, Washers Or Hardware - Sold Separately
* Made In USA
* Sold Individually
* Warranty on Bumper Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM) ***
** This Item Is Special Order. This Item Will Not Be Able To Be Canceled And Is Non-Returnable.
* Please Verify Mounting Hole Pattern, Some Year Models Can Have Multiple Offerings.
Valley Chrome Texas Rolled End Bumper W/ 15 - 2 Inch Round Light Holes Fits Kenworth K100E Cabover
* High Quality Replacement Bumper* Made Of 7-Gauge (3/16 Inch Thick) Chrome-Plated Steel
* Has Cutouts For
- Mounting Holes
- 15 Round 2 Inch Light Holes
* 18 Inch Texas Rolled End
* Does Not Include Mounting Bolts, Washers Or Hardware - Sold Separately
* Made In USA
* Sold Individually
* Warranty on Bumper Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM) ***
** This Item Is Special Order. This Item Will Not Be Able To Be Canceled And Is Non-Returnable.
* Please Verify Mounting Hole Pattern, Some Year Models Can Have Multiple Offerings.
Valley Chrome Texas Rolled End Bumper W/ Tow Holes Fits Kenworth K100E Cabover
* High Quality Replacement Bumper* Made Of 7-Gauge (3/16 Inch Thick) Chrome-Plated Steel
* Has Cutouts For
- Mounting Holes
- 2 Square Fog Light Holes
* 18 Inch Texas Square
* Does Not Include Mounting Bolts, Washers Or Hardware - Sold Separately
* Made In USA
* Sold Individually
* Warranty on Bumper Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM) ***
** This Item Is Special Order. This Item Will Not Be Able To Be Canceled And Is Non-Returnable.
* Please Verify Mounting Hole Pattern, Some Year Models Can Have Multiple Offerings.
Valley Chrome Texas Rolled End Bumper W/ Tow, 15 - 2 Inch Light Holes Fits Kenworth K100E Cabover
* High Quality Replacement Bumper* Made Of 7-Gauge (3/16 Inch Thick) Chrome-Plated Steel
* Has Cutouts For
- Mounting Holes
- 2 Square Fog Light Holes
- 15 - 2 Inch Round Light Holes
* 18 Inch Texas Square
* Does Not Include Mounting Bolts, Washers Or Hardware - Sold Separately
* Made In USA
* Sold Individually
* Warranty on Bumper Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM) ***
** This Item Is Special Order. This Item Will Not Be Able To Be Canceled And Is Non-Returnable.
* Please Verify Mounting Hole Pattern, Some Year Models Can Have Multiple Offerings.
Valley Chrome Texas Rolled End Bumper W/ Fog Light Holes Fits Kenworth K100E
* High Quality Replacement Bumper* Made Of 7-Gauge (3/16 Inch Thick) Chrome-Plated Steel
* Has Cutouts For
- Mounting Holes
- 2 Square Fog Light Holes
* 18 Inch Texas Square
* Does Not Include Mounting Bolts, Washers Or Hardware - Sold Separately
* Made In USA
* Sold Individually
* Warranty on Bumper Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM) ***
** This Item Is Special Order. This Item Will Not Be Able To Be Canceled And Is Non-Returnable.
* Please Verify Mounting Hole Pattern, Some Year Models Can Have Multiple Offerings.
Valley Chrome Texas Rolled End Bumper W/ Tow, Fog Light Holes Fits Kenworth K100E
* High Quality Replacement Bumper* Made Of 7-Gauge (3/16 Inch Thick) Chrome-Plated Steel
* Has Cutouts For
- Mounting Holes
- 2 Square Fog Light Holes
- Tow/Hitch Holes
* 18 Inch Texas Square
* Does Not Include Mounting Bolts, Washers Or Hardware - Sold Separately
* Made In USA
* Sold Individually
* Warranty on Bumper Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM) ***
** This Item Is Special Order. This Item Will Not Be Able To Be Canceled And Is Non-Returnable.
* Please Verify Mounting Hole Pattern, Some Year Models Can Have Multiple Offerings.
Additional Information
Truck Class: |
Heavy Duty |
Height Options: |
18 Inch |
Light Options: |
Without Lights |
Location: |
Made In USA |
Style Options: |
Texas Rolled End |
Material Options: |
Steel |
Make: |
Kenworth |
Finish Options: |
Chrome-Plated |
Type Options: |
Standard Mount |
Size Options: |
7 Gauge |
Product Type: |
Bumpers |
