BESTfit Premium Heater Hose Nylon Fiber Reinforced

Are you in the market for heater hose? Let 4 State Trucks assist you with finding the hose you need including 3/4 inch silicone premium heater hose with 1-ply of nylon fiber reinforcement, thicker wall for higher pressure handling than that of standard heater hose with a green outside lining and red inside lining. This hose is resistant to coolant additives, has a bend radius of five times of the inside diameter of the hose, working pressure is a 1/3 of the burst pressure with the actual burst pressure of 325 PSI and is sold by the foot. This hose has an inside diameter of 0.75 inches, outside diameter of 1.14 inches, resists hardening, cracking, cold leaks, aging and many chemicals.

* Made Of High Quality Silicone
* Silicone Hose With 1-Ply Of Nylon Fiber Reinforcement
* Thicker Wall For Higher Pressure Handling Than Standard Heater Hose
* Green Cover
* Red Liner
* Size
- .75 Inch Inside Diameter
- 1.14 Inch Outside Diameter
- 325 PSI Actual Burst Pressure
- 0.301 LB/FT Weight
* Meets Or Exceeds The Operating Requirements Of SAE J20 R3 Class A
* Meets Or Exceeds The Operating Requirements Of TMC RP303B Class I Grade II
* Temperature Range Is - 65 Degree F to + 350 Degree F
* Standard Wall Thickness Is .170 Inch / .220 Inch
* Working Pressure Is 1/3 Of the Burst Pressure
* Bend Radius Is 5 Times The ID Of The Hose
* Resistant To Coolant Additives
* Resists Hardening, Cracking, Cold Leaks, Aging, And Many Chemicals
* Ideal For Extreme Temperature And Various Pressure Ranges Where High Performace Levels Are Required
* Sold By The Foot
* Warranty On Heater Hoses Against Defects In Workmanship & Material From Date Of Purchase

*** High Quality Aftermarket Replacement Part (Not OEM) ***